So, bike running great. Couple things.
I use the choke/Fuel enrichment on the side of the Mikuni carbs to start it but after a few seconds, if I leave the choke on , it will die.
NOW, if I push down on the choke handle which lifts the fuel enrichment plunger more, it will keep running and idle 500-800RPM more.
Strange, like wondering if there is a way to adjust how much the plunger goes up, I have not looked at it hard, but maybe a way to bend the spring?
So,until I have the bike fully warmed up which seems like after I've ridden it a couple miles, I turn the idle screw on the left carb up so it idles nicely at the beginning at 1000rpm, but after the warm up of a few miles or more, it will be at 1500rpm so I have to drop it back down with the screw. Is this typical?
I use the choke/Fuel enrichment on the side of the Mikuni carbs to start it but after a few seconds, if I leave the choke on , it will die.
NOW, if I push down on the choke handle which lifts the fuel enrichment plunger more, it will keep running and idle 500-800RPM more.
Strange, like wondering if there is a way to adjust how much the plunger goes up, I have not looked at it hard, but maybe a way to bend the spring?
So,until I have the bike fully warmed up which seems like after I've ridden it a couple miles, I turn the idle screw on the left carb up so it idles nicely at the beginning at 1000rpm, but after the warm up of a few miles or more, it will be at 1500rpm so I have to drop it back down with the screw. Is this typical?