DB90

🤭🤭

Gotcha. I don't have any experience with the rebel spirit ones but I've heard mixed reviews. I could be mistaken but I think my intake...

Which intake do you have?

I had good luck on a dirt intake boot using plasti dip haha

@XS Garth If this is the case then mine are good. No cracks all the way through

I might have some

Gonna send you a pm

Let's do it man!

Hello all!! I wanted to announce that I am now offering 2 into 1 intakes! I have two material options at the moment, Polished Stainless...

Any chance you have a good crank? Also looking for good intake and exhaust valves. Both for a 78.

Oh gotcha. So you have a good crank? I am in need of one lol

Can I see some pictures of the crank? How is the cladding on the small rod ends?

Mikuni VM34 or VM36

For anyone interested I have now launched my online store where 2 into 1 intakes can be purchased!! Feel free time reach out if you have...

Hello all! I had mentioned on a thread about 2 into 1 intakes that I was going to be venturing into building them. Well, the time has...

So I was digging into the head on this motor. Taking everything out so I can get the whole motor vapor blasted. I came across what looks...

From what I understand, he is notoriously bad at responding 😤

I was able to find his email through Facebook Counterbalancecycles@gmail.com

Is that 1-3/4'' tubing?

This is a great thread with LOADS of great info! does anyone happen to know what size tubing is usually utilized in these 2 into 1 intakes?

Got it running today! Very rough but running. The carbs that came in it are extremely caked with crap so I threw on a different set of...

I will definitely be doing that on both warm engine and checking the carbs. It appears to have been drained of all gas when in storage...

Yeah it definitely looks that way. Hoping there's no damage to anything. I did a compression test and it's testing at 120psi. Abit low...

I don't believe the KZ was soft mounted. We went with an XS because the KZ was wayyyyy heavy. I think she will be happy.

Just picked up this beauty! Did some fabrication work in trade for it. 1979 Special! This bike is for the wife. I had built her an 83...

Welp! No turning back now! Waiting on a manual to get here so I can check tolerances and what not. Until then I'll work on building...