VIN Sticker Reproduction Company Details

maftap713

XS650 Member
Messages
9
Reaction score
1
Points
3
Location
Ontario, Canada
V.I.N. (Vehicle Identification Number) Reproduction
CONDITIONS OF SALE
BDESIGNS offers the service of VIN plate/sticker reproductions for vintage bike owners, whose bikes
have had their VIN plates damaged beyond being readable, or to replace the current VIN when it pulled to
sandblast and re-paint the frame.
Be aware that in some Countries, States or Provinces, it MAY be a Federal or Provincial offence to
willfully remove a VIN sticker or plate. Some areas MAY accept removal under certain circumstances if it
will be replaced with an exact duplicate or a Department of Motor Vehicle issued sticker. All Countries,
States and Provinces may differ, so it is up to the customer to find out the legal requirements in their
jurisdiction.
It is sometimes possible to remove the current VIN sticker for frame painting without damaging the
sticker during removal. If you chose to remove the current sticker, you should take some clear close-up
photos and dimensions of the current VIN sticker prior to removing it. If you manage to remove the
original VIN intact, use a 3M double sided tape to re-install the VIN after painting. If it should be damaged
during removal, we can reproduce it for you.
Legal Requirements for Reproduction
Note: No personal information will be shared and is kept completely confidential.
- Full name, address and phone number.
- Year, make and model of your motorcycle.
- A high resolution colour scan of your full ownership card showing the VIN for proof of ownership.
- A high resolution scan of your Drivers License (both sides if you have information on both sides) for
personal verification.
- A clear photo of the matching VIN number off the engine casing (and frame if applicable).
Artwork Requirements
- The original VIN, if intact.
- A clear, close-up, high resolution, non-resized photo or scan of the original VIN, either before you pull
it, or after if it is still in tact.
- A measurement of the overall length and width of the decal.
Once you have collected all the information, please send to BDesigns in either of the following methods;
Email (preferred) all scanned documents and other information to sales@bdesigns.ca
Or
Post mail to;
BDesigns
243 Michener Crescent
Kitchener, Ontario
Canada N2A 3V6

If anybody can help with a photo of a VIN Sticker for my 1976 that would be good
 
Back
Top