Two E-Advancers for 277, would it work?

Sorry if this has already been covered, but...
I've got an 81 and want to do the 277/PMA/Pamco with the E-Advancer.
I know Pete has been working on the 277 E-Advancer for some time now, but I was wondering if you could just run two advancers with two coils to get the job done.
I'm guessing it's not that simple?

My thoughts are that you would start with something like this from Mike's:
http://www.mikesxs.net/product/14-0906.html


Throw out the centrifugal advance (and some other bits) and add Pete's cap, split the pick-ups and wire them trough the two advancers and then off to the coils.
http://www.yamahaxs650.com


Lets forget the cost for the moment and focus on whether it would work.

Your thoughts??

I am nearly certain it will work just fine I know nothing. (single tower coils)

The E-Advancer requires 60 degree rotors. The 277 rotors are 90 degree. Won't work.

Uncle Bryan said:

... I'm guessing it's not that simple? ...

Click to expand...

Well at least I was partially right

Thanks Pete, that cleared that up real quick

My thoughts as to what you might start with is a Probe ignition for the 277* rephase. Google for the URL.