Bike tries to engage when I connect the battery

[kevenc]

Here's the answer from motogadget :

Hello Keven,

the m-unit v2 has no reset procedure because way it is designed there is no state to reset.
If an output is permanently on it usually is defective.
Was it wired directly to the starter?

Best regards

Jon
motogadget Support Team

Welp. Those thing are pricy as hell

 

[Its been a long time]

Here's the answer from motogadget :

Hello Keven,

the m-unit v2 has no reset procedure because way it is designed there is no state to reset.
If an output is permanently on it usually is defective.
Was it wired directly to the starter?

Best regards

Jon
motogadget Support Team

Welp. Those thing are pricy as hell

Then I'd disconnect everything apart from 12v in and ground. To see if 12v out appears at the starter output terminal(s) where it shouldn't. If it does then it is clearly faulty.