Robert Dell Aquila
Shine it on
So I'm having a charging problem, I believe my stator is the culprit. I have a 1975 xs650 with an after market reg/rec combo. My stator wires are as follows: 3 white wires going to 3 white from reg/rec, yellow capped off, black going to black, green to green. And my brown from reg/rec is going to power after the ignition switch. My rotor is reading 5.1ohm between the rings and infinity from rings to case. Outer brush is reading 11.8 V. My stator is reading 0.2ohms between the white wires with the yellow wire capped off. I'm not sure if this is too low. Also I dont know if I have the stator wired correctly. If anyone could help it would be very much appreciated! Thanks!