Ok, if this gets too confusing I’ll try to mock up a diagram but here goes. First image is ignition, with 2 brown, 2 black/blue, one red, one red yellow.
Red to fuse/battery
Red/yellow to starter button
In “on” position I have cont. from red to browns, and red to red/yellow
In “park” position, cont. from red to blues.
In better news, I’ve made some sense of the control wires
below is shiny new right controls (shorted out old one and melted some stuff.. I’m that inept). Red/white to red/yellow on ignition loom (starter)
Brown to red on coils and to red/white on starter relay
Blue/white to blue/white on starter relay
This leaves a black/blue, blue, and red/yellow. I’m guessing one goes to hot, one goes to left control dimmer, and one goes to headlight.. but who goes where?
Below is left control. To keep this short, I know what wires go where, just need to piece everything together and create a whole new bike-specific diagram since nothing matches any one (or any) diagrams in my clymer
so that’s my novel. I’m just looking for any insight on how these puzzle pieces go together and the rest should all be really straight forward.. you know, like it always is
****edit*** it should be noted that I won’t be running any dummy lights or safety relay. The bike has only the necessary lights to pass inspection