For Sale - Garage cleaning - miscellaneous, cheap

Original post has been updated to reflect remaining items. I do apologize that some parts have sold since the last update. I was out of town for a week on a work trip. But, I'm back so I can sling more parts!

As for some of the questions.
@Prisondawg, @tk91j, @RC4MAN and @wannabridin, you all requested front end items. I have measured them all, I have 3 fork sizes. They're in varying amounts of completeness.

If you all happen to need items of Set #1, the 35mm tubes, I would be willing to separate those items rather than selling the whole shebang as a set.
@Prisondawg, are these the triples you want?
@RC4MAN, you inquired about the brakes so I'm including you here.
@wannabridin, are these the fork legs you want? (more photos of stanchions below). If so, do you need the fork caps? @tk91j is looking for a set and I believe these are what he's looking for.

Set #1, 35mm tubes, the most complete, adjustable fork cap. Brake caliper, master cylinder, line and junction, triple w/ tapered bearing, headlight tabs, mirrors, axle.
wZQTKg1h.jpg

b8czu0bh.jpg

7D4281Rh.jpg

AIi40wUh.jpg

wvsAGtjh.jpg


Set #2, 36mm tubes, forks and triple, solid fork cap.
5IRhuZ6h.jpg

px8roITh.jpg

gmP4STvh.jpg


Set #3, 34mm tubes, forks only, non adjustable cap. (That's water, not fork oil. The seals are bad though.)
8R0fUCOh.jpg

txRdM74h.jpg

wSjrplKh.jpg


@Prisondawg, the carb slides.
ppj0fvDh.jpg

gxBTOM2h.jpg

jBpyJJhh.jpg


@JAX71224, this speedo drive work?
NzW3gICh.jpg


Other PM's have been replied to.
Original post has been updated to reflect remaining items. I do apologize that some parts have sold since the last update. I was out of town for a week on a work trip. But, I'm back so I can sling more parts!

As for some of the questions.
@Prisondawg, @tk91j, @RC4MAN and @wannabridin, you all requested front end items. I have measured them all, I have 3 fork sizes. They're in varying amounts of completeness.

If you all happen to need items of Set #1, the 35mm tubes, I would be willing to separate those items rather than selling the whole shebang as a set.
@Prisondawg, are these the triples you want?
@RC4MAN, you inquired about the brakes so I'm including you here.
@wannabridin, are these the fork legs you want? (more photos of stanchions below). If so, do you need the fork caps? @tk91j is looking for a set and I believe these are what he's looking for.

Set #1, 35mm tubes, the most complete, adjustable fork cap. Brake caliper, master cylinder, line and junction, triple w/ tapered bearing, headlight tabs, mirrors, axle.
wZQTKg1h.jpg

b8czu0bh.jpg

7D4281Rh.jpg

AIi40wUh.jpg

wvsAGtjh.jpg


Set #2, 36mm tubes, forks and triple, solid fork cap.
5IRhuZ6h.jpg

px8roITh.jpg

gmP4STvh.jpg


Set #3, 34mm tubes, forks only, non adjustable cap. (That's water, not fork oil. The seals are bad though.)
8R0fUCOh.jpg

txRdM74h.jpg

wSjrplKh.jpg


@Prisondawg, the carb slides.
ppj0fvDh.jpg

gxBTOM2h.jpg

jBpyJJhh.jpg


@JAX71224, this speedo drive work?
NzW3gICh.jpg


Other PM's have been replied to.
Great and hope your trip goes well, thanks again........
Got the speedo drive unit and all looks fine.....Thank you very much!
 
Happen to have a front battery tray rubber mount and the two little mounts that they hang on? Also,I have any of the tank front rubber bushings? might need those...

I don't think I have the battery tray mount, I know I have a battery tray though. Is it part of that assembly? No tank rubber mounts.

Do u still have the carbs n are any of ur bars Clubmans

I do still have the complete set of carbs. No clubmans, unfortunately.
 
Ill take the set of carbs how much n did u part the carbs out at all i seen where sumone wanted carb diaphrams . Id rathath by a set of carbs that r intact is there nething missing or wrong with the carbs
 
Ill take the set of carbs how much n did u part the carbs out at all i seen where sumone wanted carb diaphrams . Id rathath by a set of carbs that r intact is there nething missing or wrong with the carbs

That guy didn’t end up buying the diaphragms. But, if you’re looking for a complete set of carbs ready to bolt on, these aren’t gonna fit the bill. They need attention and don’t have all the mounting brackets. They’ll either need some extra parts or they’d make great part donors.
 
Hi
Do you still have the 34mm forks (with the fender lugs on)? Would like to make an offer if they are in reasonable condition. I am based in South Africa so shipping cost need to be factored in.


Doing some garage cleaning. Would like to move this stuff. Not looking to get rich, and unless a price is stated, I'm open to just about any reasonable offer to get this stuff to a new home rather than the bin.
Mostly XS take off parts from probably a '75 or '79 (not 100% positive but that's likely the case) and there's a few random items in there.
I have some things posted locally and on other sites, I'll do my best to update availability.

Front mag wheel, pretty sure it's from a '79. Tire is shot.
5U4GQi6h.jpg


2005 GSXR 600 front wheel in good shape, some chips in the paint. Tire is a Michelin Commander 2, 120/90-17 with about 50 miles on it. It's an oddball tire for the wheel, I was going to use it for a build that didn't end up using it. $200 shipped.
wPyKtLgh.jpg


PWg8AJzh.jpg


oog4n45h.jpg


4TU0GGth.jpg


JdDjtyvh.jpg


unHZmtUh.jpg


piYKW2zh.png


The spokes are in usable condition. I was able to undo them without much hassle.
y9wW1Ush.jpg


No idea what these carbs came off of. They're in rough shape and missing some screws.
OLqmabBh.jpg

qOw7ODmh.jpg


Fuel tank off a '79. Paint has been stripped, just has some light surface rust from sitting. A couple small dents but nothing major. Threads for badges are still there. It was repaired at one point and will need to be repaired again. It's leaking from the spot with the weld on top of the weld.
CFA5ZE2h.jpg

VF0ByWCh.jpg

JX2Pcunh.jpg

oJySf74h.jpg


Everything in this photo I know for sure came off a '79.
u7pxHznh.jpg


0VhWDzQh.jpg


TtDUid2h.jpg


XXtvjVMh.jpg


HD footpeg
J9ETa5Kh.jpg

EldRC8hh.jpg


G6TfSWgh.jpg


oQ1wFkoh.jpg


HD passenger backrest off a late '80's sportster
ZeuRH1sh.jpg


mpVaralh.jpg


Brand new, in the package from MikesXS. Bottom end copper washer kit.
dte6ohHh.jpg


More pics available upon request. Parts are located in Maplewood, MN (near St. Paul).
Would love to make package deals!!
I hate doing the back and forth b.s. about shipping prices so please make your offer with shipping considered. Things like the wheels and forks we might have to get quoted, though.

Let's find these parts new homes!
Got the speedo drive unit and all looks fine.....Thank you very much!
 
Hi
Do you still have the 34mm forks (with the fender lugs on)? Would like to make an offer if they are in reasonable condition. I am based in South Africa so shipping cost need to be factored in.

I will have to check on the fender lugs when I get home from my weekend trip. I'll be in contact with you soon.
 
Hi
Do you still have the 34mm forks (with the fender lugs on)? Would like to make an offer if they are in reasonable condition. I am based in South Africa so shipping cost need to be factored in.

Better details of the forks. Message me your thoughts/offer and I’ll dig into shipping.

uKSD8iZ.jpg

bHz41YR.jpg
 
Better details of the forks. Message me your thoughts/offer and I’ll dig into shipping.

uKSD8iZ.jpg

bHz41YR.jpg
They look like the right ones. Will send some photos with rough dimensions to make sure. Judging from the photo I have to assume that the stanchions/tubes will need a grind & hard chrome to bring them up to spec. Any idea what the internal condition of the boots are and the damper rods/pistons as that is where my main problem lies. Once you get an idea on shipping costs we can talk further
20190829_162503.jpg
 

Attachments

  • 20190829_162320.jpg
    20190829_162320.jpg
    211.2 KB · Views: 172
I did a little cleaning, they’re pitted a bit, one worse than the other. If you’re going for showroom condition these aren’t it, but I think they’re usable if you’re not shooting for perfection.
One measurement, I wasn’t planning on disassembling them.

zFZTAUf.jpg


KCES4yk.jpg
 
Original posts have been updated to reflect a few more sales.

We're getting there! Let's make some deals and move these things from my garage to yours!
 
Doing some garage cleaning. Would like to move this stuff. Not looking to get rich, and unless a price is stated, I'm open to just about any reasonable offer to get this stuff to a new home rather than the bin.
Mostly XS take off parts from probably a '75 or '79 (not 100% positive but that's likely the case) and there's a few random items in there.
I have some things posted locally and on other sites, I'll do my best to update availability.

Front mag wheel, pretty sure it's from a '79. Tire is shot.
5U4GQi6h.jpg


2005 GSXR 600 front wheel in good shape, some chips in the paint. Tire is a Michelin Commander 2, 120/90-17 with about 50 miles on it. It's an oddball tire for the wheel, I was going to use it for a build that didn't end up using it. $200 shipped.
wPyKtLgh.jpg


LniJwnTh.jpg


bMuDkYAh.jpg


xEsnbnSh.jpg


R47yOq2h.jpg


piYKW2zh.png


The spokes are in usable condition. I was able to undo them without much hassle.
y9wW1Ush.jpg


No idea what these carbs came off of. They're in rough shape and missing some screws.
OLqmabBh.jpg

qOw7ODmh.jpg


Fuel tank off a '79. Paint has been stripped, just has some light surface rust from sitting. A couple small dents but nothing major. Threads for badges are still there. It was repaired at one point and will need to be repaired again. It's leaking from the spot with the weld on top of the weld.
CFA5ZE2h.jpg

VF0ByWCh.jpg

JX2Pcunh.jpg

oJySf74h.jpg


Everything in this photo I know for sure came off a '79.
4BjIONRh.jpg


0VhWDzQh.jpg


TtDUid2h.jpg


XXtvjVMh.jpg


HD footpeg
J9ETa5Kh.jpg

EldRC8hh.jpg


G6TfSWgh.jpg


oQ1wFkoh.jpg


HD passenger backrest off a late '80's sportster
ZeuRH1sh.jpg


mpVaralh.jpg


Brand new, in the package from MikesXS. Bottom end copper washer kit.
dte6ohHh.jpg


More pics available upon request. Parts are located in Maplewood, MN (near St. Paul).
Would love to make package deals!!
I hate doing the back and forth b.s. about shipping prices so please make your offer with shipping considered. Things like the wheels and forks we might have to get quoted, though.

Let's find these parts new homes!
I would like the throttle assembly
 
Back
Top