Valve tip ground flat/square. About 0.003"-0.004" removed, saving the stellite surface.

Valve tip ground flat/square. About 0.003"-0.004" removed, saving the stellite surface.

  • 0
  • 0
Grinder locked into 90° position. Spinning valve slowly fed in.

Grinder locked into 90° position. Spinning valve slowly fed in.

  • 0
  • 0
The grinder has an 8mm ID spindle, so it can also grind valve tips. Junk valve chucked up. Note crazing/cracking of tip.

The grinder has an 8mm ID spindle, so it can also grind valve tips. Junk valve chucked up. Note crazing/cracking of tip.

  • 0
  • 0
Close-up of finished adjuster, 19mm radius.

Close-up of finished adjuster, 19mm radius.

  • 0
  • 0
Polished tip. Reflection is the overhead strip lighting.

Polished tip. Reflection is the overhead strip lighting.

  • 0
  • 0
Next step, polish the radiused tip.

Next step, polish the radiused tip.

  • 0
  • 0
Finished grinding to 19mm radius

Finished grinding to 19mm radius

  • 0
  • 0
Grinding fixture fitted onto pivot pin, ready to grind.

Grinding fixture fitted onto pivot pin, ready to grind.

  • 0
  • 0
Pivot pin set at 19mm (3/4") from face of abrasive disc.

Pivot pin set at 19mm (3/4") from face of abrasive disc.

  • 0
  • 0
Damaged valve adjuster screw chucked-up

Damaged valve adjuster screw chucked-up

  • 0
  • 0
8mm Tip Grinding fixture

8mm Tip Grinding fixture

  • 0
  • 0
TwoManyXS1Bs

8mm Grinder

Rotating fixture for tip grinding 8mm diameter parts.

Valve Adjuster tips, Valve Stem tips, Clutch Pushrod and Adjuster.

Note: Album pictures are in reverse sequence.
Click to expand...
There are no comments to display.

Album information

Album owner
TwoManyXS1Bs
Date created
Item count
11
View count
2,474
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

TwoManyXS1Bs

TwoManyXS1Bs

Media items
502
Albums
35
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top