Vented Side Cover

Vented Side Cover

  • 0
  • 0
IMG_3099

IMG_3099

  • 0
  • 0
2F3 Headlight Swap

2F3 Headlight Swap

  • 0
  • 0
With Stainless Mesh

With Stainless Mesh

  • 1
  • 0
DIY RectReg_2

DIY RectReg_2

  • 0
  • 0
GN250 Ignition With Pigtail For XS650

GN250 Ignition With Pigtail For XS650

  • 0
  • 0
Nat'l Cycle N2543 Flyscreen

Nat'l Cycle N2543 Flyscreen

  • 1
  • 0
Polished Risers And Triple Clamp_2

Polished Risers And Triple Clamp_2

  • 1
  • 2
VDO voltmeter, homemade spacer & o-rings used to mount meter in homemade bracket

VDO voltmeter, homemade spacer & o-rings used to mount meter in homemade bracket

  • 0
  • 0
3/4" copper pipe end caps shortened & center-drilled to fit 650 tank dampers for 750 tank install (must enlarge damper ID slightly)

3/4" copper pipe end caps shortened & center-drilled to fit 650 tank dampers for 750 tank install (must enlarge damper ID slightly)

  • 0
  • 1
650 tank damper as installed for 750 tank swap

650 tank damper as installed for 750 tank swap

  • 0
  • 4
1/4" hardware used to install modified 650 tank dampers

1/4" hardware used to install modified 650 tank dampers

  • 0
  • 0
Yamaha TW200/XT225/TTR250 Master Cylinder - 11mm bore diameter. Perfect for the stock late-model, single-piston caliper but too sensitive for a 4-pot

Yamaha TW200/XT225/TTR250 Master Cylinder - 11mm bore diameter. Perfect for the stock late-model, single-piston caliper but too sensitive for a 4-pot

  • 0
  • 0
Brembo 4-pot, 2-pin caliper - right side view - installed 18Jul2014 with Pandemonium kit using the narrower spacers supplied - XS1100 5mm thick rotor

Brembo 4-pot, 2-pin caliper - right side view - installed 18Jul2014 with Pandemonium kit using the narrower spacers supplied - XS1100 5mm thick rotor

  • 0
  • 0
4-pot Brembo caliper - left side view

4-pot Brembo caliper - left side view

  • 0
  • 0
"RadioShack" fuse box fix - replaced OEM brass clips prone to breakage

"RadioShack" fuse box fix - replaced OEM brass clips prone to breakage

  • 0
  • 0
14Apr2016 Back to a 19" front rim and tire - they match the 18" rear better than the 21" I had on earlier

14Apr2016 Back to a 19" front rim and tire - they match the 18" rear better than the 21" I had on earlier

  • 0
  • 0
14Apr2016 right-side view with new 19" front wheel

14Apr2016 right-side view with new 19" front wheel

  • 0
  • 0
Sketch of bracket to mount Boyer-Brandsen coil on late -model XS650

Sketch of bracket to mount Boyer-Brandsen coil on late -model XS650

  • 0
  • 0
As First Seen on 03Mar2010 - very complete 1982 Heritage Special

As First Seen on 03Mar2010 - very complete 1982 Heritage Special

  • 0
  • 0
Mileage as Bought

Mileage as Bought

  • 0
  • 0
Raised Horn

Raised Horn

  • 0
  • 0
SR500 tach installed to eliminate pilot light box

SR500 tach installed to eliminate pilot light box

  • 0
  • 0
18-inch rear rim and tire mounted with original Special seat, grabrail and taillight assembly

18-inch rear rim and tire mounted with original Special seat, grabrail and taillight assembly

  • 0
  • 0
A

Redleg's '82 Heritage Special

A work in progress - some mod's I've made so far after buying in April 2010
Click to expand...
There are no comments to display.

Album information

Album owner
aldo5468
Date created
Item count
59
View count
8,647
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

A

aldo5468

Media items
59
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top