Media added by gracer

Navigation

  1. XS650 Originals and Restorations 174
  2. XS650 Choppers 29
  3. XS650 Bobbers 126
  4. XS650 Trackers 163
  5. XS650 Cafe Racers 102
  6. XS650 Slightly Modified 139
Browse albums

Media comments

  • Tony Harrell
    CLASS ACT 06
    Couldn't remember your name after first seeing your work , but finally found you and got it bookmarked ! Love all your builds!

Most media items

  1. YAM277
    510

    YAM277

  2. TwoManyXS1Bs
    502

    TwoManyXS1Bs

  3. I am Carbon
    500

    I am Carbon

  4. Mailman
    463

    Mailman

  5. XS650
    452

    XS650

Media statistics

Categories
6
Albums
2,941
Uploaded media
25,278
Embedded media
18
Comments
1,625
Disk usage
4.5 GB
Use this chart to convert change in ring gap in the cylinder to wear of the cylinder diameter if you don't have a bore gauge. Use any ring and measur

Use this chart to convert change in ring gap in the cylinder to wear of the cylinder diameter if you don't have a bore gauge. Use any ring and measur

  • 0
  • 0
Position swivel in center of valve to prevent off-axis loading of valve

Position swivel in center of valve to prevent off-axis loading of valve

  • 0
  • 1
Position clamp to clear tappet cutout

Position clamp to clear tappet cutout

  • 0
  • 0
Compressed spring, hole is aligned so that keepers can be removed/installed

Compressed spring, hole is aligned so that keepers can be removed/installed

  • 0
  • 0
$15 dollar welding clamp from Harbor Freight

$15 dollar welding clamp from Harbor Freight

  • 0
  • 0
For in-line loading, mark center of clamp based on clamp swivel position for drilling hole

For in-line loading, mark center of clamp based on clamp swivel position for drilling hole

  • 0
  • 0
.625 diameter hole drilled in clamp end so that valve keepers can be removed/installed

.625 diameter hole drilled in clamp end so that valve keepers can be removed/installed

  • 0
  • 0
Grind down the support rib first before enlarging hole

Grind down the support rib first before enlarging hole

  • 0
  • 0
Valve Spring Compressor Tool made from Harbor Freight Welding Clamp

Valve Spring Compressor Tool made from Harbor Freight Welding Clamp

  • 0
  • 0
Prepping for the engine rebuild

Prepping for the engine rebuild

  • 0
  • 0
Frenched-in LED tail light

Frenched-in LED tail light

  • 0
  • 0
Left side view with tuning fork logo in silver

Left side view with tuning fork logo in silver

  • 0
  • 2
Right side view with fresh paint

Right side view with fresh paint

  • 0
  • 0
Rear view with Cobalt Metalic color

Rear view with Cobalt Metalic color

  • 0
  • 0
Tins in sandable primer

Tins in sandable primer

  • 0
  • 0
Rear iso view, next will be frenching in the tail light

Rear iso view, next will be frenching in the tail light

  • 0
  • 0
Top view showing the seat and rear fender lines

Top view showing the seat and rear fender lines

  • 0
  • 0
Side view fom standing position

Side view fom standing position

  • 0
  • 0
Some sheetmetal work, bondo and fabricated a seat

Some sheetmetal work, bondo and fabricated a seat

  • 0
  • 0
Side view showing profile of tank and rear section

Side view showing profile of tank and rear section

  • 0
  • 0
Seat pan fit up ready for foam

Seat pan fit up ready for foam

  • 0
  • 0
Rear tins fit check

Rear tins fit check

  • 0
  • 0
Iso view of seat and fender on bike

Iso view of seat and fender on bike

  • 0
  • 0
Seat pan tacked and mocked up on bike

Seat pan tacked and mocked up on bike

  • 0
  • 0
Back
Top