Recent content by bbb88

  1. B

    Speedo making noise

    On another note, the diodes fixed the 4-way flasher problem, and changing the wiring on the different replacement tach I got on eBay all worked :)
  2. B

    Speedo making noise

    Thanks for the thoughtful reply. I sprayed some wd40 and cable lube, then hooked up the end of the cable to a drill. The gauge whined for a second, then it stopped and started working. Shrug... The noise was definitely in the speedo, not in the cable. Prying apart the spare I have doesn't...
  3. B

    Speedo making noise

    Hey all, I have an '82 XS650, craigslist special. I don't know if they're original gauges for this bike or from another year. I took off the gauge cluster to rewire the center turn signal indicator after doing a LED replacement for the break lights and turn signals, and replace the tachometer...
  4. B

    Carburetor Tuning

    That picture refers to the "pilot/air jet" but I thought the pilot jet was the smaller jet that goes in the float bowl under the rubber plug?
  5. B

    Carburetor Tuning

    The dreaded PO ground off all the mounts for the left side exhaust... :shrug: When you say 130 air jets, what are you referring to? I purchased the Keyster kit because I couldn't find new pilot jets for the BS34s
  6. B

    Carburetor Tuning

    I put in 49 pilot and 138 main. The stock needle is in, but I replaced the needle jet. I have a replacement needle from the kit. Sound like I should order these gaskets and holders from Mikes or are there better ones out there...
  7. B

    Carburetor Tuning

    Should I put in the matching needle from the kit? The Y503-RR Also, I forgot to mention in the first post, but I did take it for a quick ride around the block and it was back firing like crazy, no power, died after about a minute.
  8. B

    Carburetor Tuning

    By throttle body shafts are you talking about the rubber gaskets on the inlets to the cylinders? Like these? https://www.mikesxs.net/yamaha-xs650-carb-holders-set-2-80-84-bs34-cv-oem-3g1-13586-3g1-13596.html The ones on there are a little cracked. I was thinking about replacing them but...
  9. B

    Carburetor Tuning

    I have an 82 XS650. This is my first XS, and first carburetored bike. It's got uni filters and aftermarket 2-1 exhaust with a muffler (unknown brand, maybe Mike's). It's got the stock timing/ignition/charging systems. When I first got it, it was very low on power, having trouble getting up...
Back
Top