thanks for the look GLJ. ill give the tci thread a gander and peak around for a boyer
Hey guys, I'm new as of the last couple months, and this site and everyones advise has been invaluable. I recently bustered my mechanical advance...
Yeah $72 for a new plate was not exactly inspiring. Thus the look into a fresh system. Unfortunately I do not have any welding skills so I’m not...
Thank you everyone for your help in finding this. I never would have looked back there. If I could ask one more question, should I order a new...
[ATTACH] You guys are geniuses
I’m guessing the pin is supposed to go where that empty hole full of metal shavings is. Is it supposed to be stuck in there after the nut comes...
[ATTACH]
Oooohhhh there is a pin that holds the whole advance assembly to the rod? Man I had no idea. Alright I’m checking it out now. Any advice for...
Machine is running on 0 cylinders. I do have a multimeter so I will check that the points are live. I should also mention that a very nice lady...
Both locating pins appear to be okay. Pulled both out and inspected. Advance unit is secure on rod. Although just to confirm, both locating pins...
Thanks guys, you’re right I did need a little breather. Let me try and be more informative. So the engine cut off while holding about 3.5k rpm. No...
Hello gentlemen, so my engine cut out while riding. I pulled off and started troubleshooting and found that the nut on my advance had come off...
morning everyone, So after a weekend of tinkering here are the results. Advance was still sticking to I pulled it out and cleaned like I had...
Separate names with a comma.
