Recent content by Geoffrey Straet

Hi, I replaced the the push screw assembly today and tried to adjust as I could. The assembly is bright new. Now when I press the lever, the clutch doesn't engage. When I turn the adjuster screw in, it'becomes harder to turn as some point, where the clutch start to engage but pressing the lever...

Ok, Thanks for confirming!

Guys, Here's a picture of my outer push rod, left side, so adjuster side. Am I right to say that the narrow dark end should be pointing out? 'Cause mine was mounted the narrow end inside. Seems like half of the assembly was mounted wrong. Just hoping the the PO did not consider doing an engine...

Done! ,worked actually quite well although my clutch cable housing is a bit damaged. The cable doesn't slide as smoothly as the throttle cable does, Worth replacing?

Very useful tips, thanks !

Thanks! All clear. Would I need to lube a new throttle cable or can I môunt it as is?

hi all, Happy new year, Can I lube my clutch cable with wd40? That's all I have at hand right now and don't feel like buying a can just for that. Thanks,

Great! Thanks Gary!

Hello, Would someone have a handy coloured wiring diagram for a xs E 78? I can see there is a bunch of files here but I can't open most of them. Thanks!

To be honest, I think I'm going to leave this one to a pro, the bike needs some finetuning like valve adjustment, timing and carburator tuning that require some knowledge that I don't have right now. The problem with the starter motor might as well be the elswehere like the gear. One thing I am...

I have one vendor here in the Netherlands that sells the whole assembly for 40$. I cleaned mine the best I could but it really doesn't look tight enough to do the job, parts of the assembly are not really available separately... Another question, how do you lubricate that thing? Would white...

Hi, I took out the assembly last night and it looks in pretty bad shape, a lot of play in the lever, the pin in broken in, the ball bearing still inside the female worm but there is no retainer at all, it comes out from both sides, is it normal? Very dirty, with a lot of grease and dirt...

There's no way this can disangage the clutch! Pulling the lever should push the thread outwards, not inwards! Am I right?

Thanks!