gggGary's latest activity

First load test that battery. A simple one is a big screw driver across the solenoid terminals see if she cranks. Then; get a nice...

You using the factory seals? (only thing that works) Usually just the bush that the throttle cable pulls against is bad. Bought a set of...

Allison wanted a new lamp.

What a wrastling match! You are one persistent fella! Great thread.

I'll see if I can shave a bit off the MC mounts to move it outwards a bit. But it's close to the frame too. Um yeah this HAS been...

Thanks kind sir but the problem's not the rod. s'more pics. I see now someone had ground the hex off the bottom of the rod cuz it IS...

:agree: Go in (very carefully) and see. Maybe start with a vinegar rinse?

I looked and sure enough AZ. Badly worn shaft bushings after the first BS38 bushing length revision in 72 seems to be a desert (grit...

Well this is embarrassing! I've been riding this bike off and on for twenty years. While doing "Jim created" work I pulled the swing...

Gathered all the parts n tools but never tried to do it. It's pretty fussy work and replacement carbs new and used are "dime a dozen"...

Happy Birthday Mr. Yamaha!