Recent content by goingsmoto

this one was actually machined flat then a additional ring was welded on then the plate was bolted down. the carbs were 34 mikunis, I have a guide to setting up your carbs if you need it email me at goingsmoto@gmail.com

Hey guys, sorry I have not been around here much. I am busy with school and I did a internship under Radical Ducati last summer. with the cases, I believe on the left hand side it was either a kit from mikesxs or I machined it down and used a big dog cover. Then on the right hand side I had...

chop it, hack it, it is your bike

Yes sir, it is hard to pay for college without anymoney.

haha is mine, if you want it. It is going on ebay tonight.

hey guys ill post up a video soon, if you want a high res picture email me at chad_wick88@hotmail.com, thank you for all the comments

thanks guys for all the compliments, and thank you Gordon for the pipes they turned out great.

sidecovers sold

thanks guys for all the compliments, i just figured out tonight that this was the new 650rider forum. so this is it, the finish product. i started my original build at 650rider so here you guys go. and dan, we rebuilt the brakes 2 years ago and since then due to the dryer outlet going to the...

pipes are not off a xs650 fyi

xs500 is 300$ ( timing is off, has clean title does run but not very well and takes some tweaking due to the timing, and i believe that valves might be off too) has a box of parts ill fix the clutch cable and clutch lever. mini hub rim is 100$ brake caliper sold, everything else make me an...