Heinz Ketchup

Ringsted motor has been my go-to for many parts, being the only shop here in Denmark that stocks xs parts and can ship from day to day...

Following this method I measured 0.20-0.35 mm side-play all around, which further confirms that the valves are done for. Monday I’ll...

I tested the seal of the valves before removing collets, turned it upside down and poured in some liquid past the valves and let it sit...

I was in a hurry so I only got to measure two valve seats, on the one with most and least wear on the valve stems - it seems like they...

Here’s a video showing the play between valve and guide - the gap is actually visible

I’ve used a few different, they all have the spring and somewhat pop into place, some came with gaskets others bought separately, but...

I’ve had them come off a few times, if you look through this thread you’ll see that I have replaced the seals several times within the...

Head’s off, quite a bit build up: there’s a little play between the valve and the valve guide, we’re looking at 7.75-7.91 when it...