Recent content by mkrill85

A month later, and shes all welded up, electricals reinstalled. Got her fired up last night for first time she's ran in 40 years. Bench synced the carbs and about 4 kicks after putting fuel to them the dragon breathed fire. I'll maybe get some pics tonight. Just gotta finish up now, wheelchair...

Just speaking from an electricians point of view, but probably not a good idea. I could see something like heater running and air compressor kicking on and tripping the breaker its tied to on the other end. 220v plugs are usually sized for the application and shouldnt allow to much addition...

I've got the headlight of a 69 ct 175 dirtbike that is stock style... only I want to say its 4 1/2" I know its about an inch smaller than my stock xs light. I have a thread in the wanted section with pictures of the bike.

Sorry, was working on the bike and honey-do's all day. PM answered.

So I thought I would post a couple pictures of what I've got, havent had much time to work on it in a couple weeks, but ordering some parts this weekend and hopefully burnin some metal in.

You would just need a normally closed/open when energized effect. Headlight feeds straight through the relay with a wire from the neutral switch light to the relay. This would energize the relay when put into neutral switching the relay from a normally closed (de-energized) to open circuit...

I'm in northwest ohio, a little south of toledo. Defiance area to be exact. I actually just ditched all the stock lighting to go with combo led units so I have absolutely everything down to the rubber gaskets, assuming they are the same 73 - 76 (pretty sure they are).

Bars are 7/8 yea. Do you mean levers and all or just electric controls? I would have to double check but I think it only has left side electrics, Headlight, turns, and horn if I remember right.

I've got some too, let me know if it doesnt work out. Depending on where your at in ohio, we may be able to cut out shipping costs too.

Bumping up lots of pretty good parts on this bike. Make offer, I wont say no as long as its in reason.

I'd be interested in the early master cyl, the brake switch and the coils. About all I need to hit the road :)

How much for the fork brace?

Tank's in good condition, no dents. Could use a good cleaning inside but not real bad for being almost 50 years old. Make offer on parts, please think of shipping too. Whats it worth to you :)

Just picked up an all original ct 175 missing chain and the kick start wont engage. So im using some parts off it and ditching the rest. All original parts, decent shape tanks good, carbs good, make offer on anything you may want. Tank would like kinda cool on the xs imo, but would take a...

I sent you an email Jim, thanks for offering this