Recent content by RC4MAN

Mine was an aluminum tank, 2.5 gal., not sure why the clean out?

And what is SOIR, Oops, never mind, saw it above

Older I get the more overwhelmed I feel and wonder how much more I will accomplish and see my garage walls closing in

Older we get the more like Humpty Dumpty we get

Had an orange one as my first bike, that's the street version with low front fender, 18" wheel and 8" DLS front brake, mine was the trail version with high fender, 20" wheel and 7" front brake I see someone replaced the lopsided shoebox muffler with something more appropriate

It was covered here, novel concept

Nice work

What is it they say about "a mud fence"

I guess HD wants so much to do a V-Rod because you must do the following, Place the front wheel in a chock to hold the bike upright Remove the faux tank/airbox cover Remove the airbox from the throttle bodies Remove the breather lines from the cam covers Place a floor jack beneath the engine...

The Barber meet is pretty good

Aberlour and Balvenie are both pretty good, curious though about the Robot reviving the thread

Goon glass and rubber, First Class glass, Grand Prix glass, Glass from the past all come to mind

Cut the shaft off flush with the raised base, drill and tap it, there may be enough metal thickness there to get sufficient thread engagement. Other wise have another turned up by a local shop, cut the whole thing off and weld a new one on.

Had the same issues with older Joe Rocket gear as well. crumbling pads and lucky that aftermarket items do fit

One of the guys I work with got the company to spring for a Creality CR30 which has been problematic from the start. All the base adhesion issues mentioned and possible fixes, cleaning, scuffing etc. And then there's variations in filament types.