Recent content by rokcrlr

I've got a complete 72 frame . I'll look to see what shape the swing arm is. It's a rolling chassis so I everything you need, But I'm not looking to trade I already have 3 or 4 of the later swing arms

I'm working on a cafe style build. I'm wanting to upgrade the rear swing arm to something stronger. I bought a couple of yz rear swing arms and they use the same size swing arm bolt, and if you use the stock XS thrust washers ,it will fit right in the frame. I will have to have shock mounts...

There are actually gasket remover sprays out there, try napa maybe? Like above ,a heat gun works decent on most, Then one of those velcro scotch pads that fit a small drill to clean up.Paint remover works about the same as gasket spray remover. Walmart use to have an aircraft remover that...

Ive got a complete 79 minus carbs for 200.00 But I live in Illinois and it would probably cost 100-125 to ship. I don't know the conditon but it does turn over. I also have a 72 complete with harness ,no carbs and it turns over also, at least the last time i checked it which was a couple years ago

KY jelly. :)

I don't like the look of the extra 3.5 inches of swing arm, So I'm scraping that idea for now, Unless I can figure away to get rid of 2".Has to come off the front.

I was wondering if anyone out there makes a simplified wireing harness. That does away with all the factory garbage. I'm not much good at anything electrical, so I thought I would see if anyone has the harnes that I could purchase.I want to clean it up and do away with all the relays and grap. I...

So far I have found 38t but There was a guy on thumpertalk awhile back saying he had a 36t, but I have't found one yet, My hubs are from a CRF450, so I have to look for gears for it then run a 18t front and you will be close to stock gearing. I think the ideal rear tire size would be a 160/70/17...

Posted via Mobile Well I got one on here, have no idea why it's sideways tho,GRRRR

Ok from what I have tried now. The YZ490 swingarm is pretty much a bolt in. You have to use the XS650 dust shields, and they are a tite fit. The only thing is it is about 3 1/2 inches longer than the xs swingarm. Not sure what this will do to handling. I tried adding pics from my Iphone, but I...

now that makes more since,:)

Interesting , I have 3 bikes and they all have 34 tooth rear sprockets and no fender interferance

I have the mag wheels, like 3 sets of them. But spoke and mags were available so which are you looking for. If your wanting the aluminum h wheels, "mud catchers' I may have a set of those.Not sure what shape they are in as they are painted black,or if they are alumiunm or steel. $250.00 plus...

I have a set of supermoto wheels from a CrF450 that I'm using. You can get bearings from ALLBallsracing. They have a roller bearing chart and just look up by size you need. I started to use a ktm wheel and hub ,but I only has the rear, came accross a good deal for the CRF set.

Go to allballsracing.com. They have a whole list of ball bearings .They run in the 5-10 buck range. Make things alot simpler than custom making an axle. If they have the bearing to fit that is.