Recent content by shaunmayfield

  1. shaunmayfield

    Another no spark pamco thread: with a twist!

    Don't want to hijack this thread, but it seems to be resolved. I am having a similar issue but with a newer Pamco unit. I got the bike all tuned and running good. Had it down while i was installing the pneumatic clutch. Went to start it to test the clutch and NO START!. I hit the end of my...
  2. shaunmayfield

    Anyone with an Elswick Hardtail kit are you using a spacer on rear wheel

    I did email Robert a couple days ago to try and get a more affirmative answer. In the meantime today I went to a buddy's house to take some measurements on his bike. So I will be checking all that out today. He also gave me a spare rear wheel spacer to check spacing width on mine.
  3. shaunmayfield

    Anyone with an Elswick Hardtail kit are you using a spacer on rear wheel

    Syndicate, I realize this is about a year old. What was the final fix? I am in the exact situation. The rear sprocket appears to be lined up with the engine sprocket but that places the wheel between .5 and .75 to the right. Any help from anyone would be appreciated!
  4. shaunmayfield

    Giveaway: Pandemonium Brake Kit! (ends 11pm CST on December 17th, 2012)

    Here is my build called 'Stella', she just about finished. Just doing the tune up and syncing the carbs. This brake set up would be incredible, but good luck to all those entering.
  5. 9846.jpg

    9846.jpg

  6. 9847.jpg

    9847.jpg

  7. 9848.jpg

    9848.jpg

  8. 9849.jpg

    9849.jpg

  9. 9850.jpg

    9850.jpg

  10. Stella

    Stella

    This is Stella, my 79'/83' XS650. The specs are: - 1979 650cc Engine - Battery, high output coil, upgraded permanent magnet alternator (PMA Kit) - PamcoPete Electronic Ignition - 1983 Frame [front half] - All gussets and tabs removed - G&L custom rear drop-seat hardtail - 2"...
  11. shaunmayfield

    pamco with no battery?

    Thanks for all your help. Now if I put an inline 20amp fuse after the battery but before the PMA then the current 20amp fuse that is on the fuse block be redundant, and in that case run it back to the main post as before, correct?
  12. shaunmayfield

    pamco with no battery?

    @Pamcopete, I have always killed a bike with it's killswitch then turn off the ignition (basically I flip the ignition and kill switch simultaneously). If the ignition switched was moved anywhere else besides the battery line then couldn't there be drain in the battery? I would assume that the...
  13. shaunmayfield

    pamco with no battery?

    Attached is my wiring diagram that I was using, except it did not have a capacitor at the time I wired it. I have a PMA, Pamco and battery and thought about adding a capacitor so if/when the battery dies the capacitor will still start the bike. If the battery completely gives up I still have a...
  14. shaunmayfield

    Elswick

    Maybe I am the lucky one. I ordered my hardtail with custom measurements. I placed the order July 13th, 2011, we emailed a couple times back and forth, I got an email on August 11th (Thursday) saying it was ready for shipping. So it was one day over, which I am totally fine with. I paid the...
  15. shaunmayfield

    Crazy idea with front wheel, advice and ideas would help

    Nice bike! I still don't understand how an American wheel has a metric axle. Was it a 5/8" axle and it was 'close' enough to the 17mm axle?
Back
Top