For Sale - One purchase takes all! Brakes, TCI box, shocks, etc.

VENMUS

Fabricator Extraordinaire
Messages
224
Reaction score
1
Points
16
Location
Iowa
Front brake caliper/rotor/master cyl/res with lever and lines, working TCI box in great condition (sold), pair of rear shocks, driver and pass footpegs, air box, coil with plug wires, kickstand with mount and spring, seat latch, speedo and tach cables, brake light, license plate light/mount, inner fender, clutch lever and cable, instrument light pod, muffler mount brackets, grab bar, full factory wiring harness (81), brake drum retaining arm, Yamaha fork cover, ignition with key (have tank to match, explained below) and I'm sure a few more odds and ends I'm forgetting. Asking $200 for all of this plus shipping anywhere in the continental US. I'd guess roughly $30 for shipping depending on how far away. I don't care if you buy it just to resell on eBay and make more money, I don't have time to do it.

Extra parts I can include on top of the deal for extra cash: 2 good gas tanks I have the keys for both, a set of factory pipes cut at the muffler joint and cleaned up, swingarm with pivot bolt, rear chrome fender, a chrome spoked rear wheel (drum), a FlyRite choppers solo seat pan, and a brembo front rotor/caliper/master cylinder/reservoir/and lever off a moto Guzzi (sold), a set of matching side covers 81 XS650 Special (sold), stock XS mufflers, perfect 81 seat, and as soon as I receive my HHB PMA I'll be selling my good working rotor/stator.

0ff24eec.jpg


368bf6aa.jpg


a014fd4a.jpg


e8cbff73.jpg


8451a3f1.jpg
 
Last edited:
Also have a frame and engine for sale local pickup or meet/delivery within reasonable distance.
 
How much for the brembo brake components? And can you post / send pictures? Is the rotor and caliper a direct swap or will it require a caliper bracket, spacers, etc?
 
I got no offers on this stuff, so I threw the better items on eBay sold the Brembo setup for $33... Yes it would have worked on an XS with a custom caliper mount. TCI sold for $50 by itself. Still have most of the rest of it!

I really just want to get rid of the stuff folks. If you're interested let me know how much you want and what your best offer is. Thanks,

Logan
 
Im in northwest IA, spirit lake/Okoboji area. I went to Iowa State in Ames so I know right here you're at.

Shocks are kayaba standard length, but they're adjustable so it depends on how you measure them. I'd be willing to give you a heck of a deal on frame and any other parts you like since you're so close. PM me.

-Logan
 
Back
Top