xs650 build off 2014!!

livingdeadmc · Feb 10, 2014

I finally got some work done to my build off bike. Made up these modified JumpStreet Panzers, 8 inch rise, over did all the bends 10 degrees, and made them just as long as the throttle.

I've also been developing this weld on jockey shift for the xs650 and I'm finally ready to roll it out. I'm super happy with the outcome.

I really just need to make struts for the fender, an exhaust and a seat and then it's off to the powder coaters for the finish.

Demin · Feb 10, 2014

That is badd azz.I love the jockey shift. :thumbsup:

I'm glad I'm in it this for the ride,'cuz there is some stiff competition on the builds.

Ranger · Feb 10, 2014

livingdeadmc said:
I finally got some work done to my build off bike. Made up these modified JumpStreet Panzers, 8 inch rise, over did all the bends 10 degrees, and made them just as long as the throttle.

I've also been developing this weld on jockey shift for the xs650 and I'm finally ready to roll it out. I'm super happy with the outcome.

I really just need to make struts for the fender, an exhaust and a seat and then it's off to the powder coaters for the finish.

Nice work as always! I look forward to stopping by your shop when I'm in Howell in early March.

Demin said:
That is badd azz.I love the jockey shift.

I'm glad I'm in it this for the ride,'cuz there is some stiff competition on the builds.

Crap, this is a competition?! :doh:

i'm totally screwed...

mkesbest · Feb 10, 2014

looks great living dead! super clean...

I hear ya Ranger, not sure if ill have mine running by then

livingdeadmc · Feb 10, 2014

Thanks guys the kind words mean a lot! I'm definitely going to be pushing myself creatively on this build. I'm hoping to really raise the bar with this bike. Lots of new and stylish stuff to come!

wiggins · Feb 10, 2014

I like the headlight like that, but think it'd look better with different lens, thought about making your own? There's tutorials about casting lenses floating around the net. Mostly taillight, but don't see any reason couldn't use the same principles for headlight

livingdeadmc · Feb 10, 2014

wiggins said:
I like the headlight like that, but think it'd look better with different lens, thought about making your own? There's tutorials about casting lenses floating around the net. Mostly taillight, but don't see any reason couldn't use the same principles for headlight

But then it would be a Lucas headlight

DIRTY DOG · Feb 10, 2014

livingdeadmc said:
But then it would be a Lucas headlight

haha thats funny

MadeInDET313 · Feb 12, 2014

im pretty sure I skipped a January update because she has sat in pieces while parts gather for a while. here is the new 16" wheels with tank and lowered forks. i did an artificial patina on tank and headlight. will put a build thread together when the rest of the disassembly and reassembly begin. :banghead:

this is how she started.....the parts.....and how she sits. i bought a lift that she will be transferred to when the build resumes.

Cpkid · Feb 17, 2014

Making some progress . Had some snow days in Philadelphia and worked on the bike . Relaced the powder coated wheels , balanced and mounted tires. Started wiring . Took apart caliper which was seized up . Going to rebuild caliper and master cylinder . I like the look of the black rims . Should mount engine next month . Should be ready for spring startup.
Regards,
CPKID

300042[/ATTACH]"]http://

300044[/ATTACH]"]http://

wiggins · Feb 17, 2014

Doubt I'll get much else done this month. Got the forks lowered 2 inches and started cleaning up frame. Tank mount and fender mounts complete. Need to mount the seat. Thinking about just running a 19" front until I can afford to send my rim and hub off to Buchanans (sp)
Trying to figure out paint scheme in my head.

Irish_prick · Feb 19, 2014

everyone in the build off plz send me a p.m. with ur mailing address so we can send ur shirts as soon as.there done!

Champco · Feb 21, 2014

Jonesin' to install this beast! Just arrived from Daniel at Pandemonium Custom Choppers. Came with spacers, axle sleeve and an inner tube. Finally ready to move forward!

[/URL][/IMG]

livingdeadmc · Feb 21, 2014

preacherman said:
Jonesin' to install this beast! Just arrived from Daniel at Pandemonium Custom Choppers. Came with spacers, axle sleeve and an inner tube. Finally ready to move forward!

[/URL][/IMG]

Welcome to the club! Looks great man!

Champco · Feb 25, 2014

This thing is anything but skinny!!!!

[/URL][/IMG]

hmusket · Feb 28, 2014

Progress has not been fast and furious, to say the least. Spent January and February, mostly chilling out, thinking about how I want to proceed and collecting parts. Fitting the XS850 gas tank to the frame is a challenge, getting it to fit on the frame backbone and then securing it, (the tank is about 4 inches longer than the 650's, and mounts to the front opposite). Did an experiment on an extra tank I had, pounded the tunnel to create a shallow-seemed to work, so I went ahead and did the same with the tank I plan to use. As an aside, the test tank was coated on the inside, the coating peeled away from the dents, something that might be relevant to remember if a person plans to make knee dents. Next step - Mounting the tank securely.

Also decided to use a triple tree from a later model Virago. Easier to adapt than the Kawasaki triple tree I originally planned to use, but can still use the Kawasaki front forks and wheel.

Bottom of XS850 tank

Tank Experiment

Taking it outside, using 4' snowbank as work platform, to cushion top of tank

Done with the pounding

Sitting on backbone

View from front

Cpkid · Feb 28, 2014

Musket that should work out .I originally wanted to use a KLR 650 tank but I had the stock tank so I'm using it . I'll use KLR tank on next build . I mounted it and everything then had a lot more 73 parts come my way .
More snow coming next week here. Keep building and stay warm.
Regards,
CPKID

300166[/ATTACH]"]http://

gracer · Feb 28, 2014

2014 Bike Build Off February update from Arizona: I'm in the process of building a custom tail light for the build-off bike. It took me a while to decide how I wanted it to look. Picture will be posted soon.

Champco · Mar 1, 2014

23 is mounted. Going to switch out the tire to a Bridgestone dual sport and go similar on the back.

[/URL][/IMG]

livingdeadmc · Mar 2, 2014

Working with my good friends at Heartbreak Cycles, they will be doing all of the powder coating on my build. No paint, all wet gloss black with a gloss white crown on the tank.

xs650 build off 2014!!

XS650 Junkie

XS650 Enthusiast

XS650 Addict

XS650 Addict

XS650 Junkie

XS650 Addict

XS650 Junkie

XS650 Guru

XS650 Enthusiast

Attachments

XS650 Addict

Attachments

XS650 Addict

master of the cut'n wheel

XS650 Addict

Attachments

XS650 Junkie

Attachments

XS650 Addict

Attachments

CBMMA Member

XS650 Addict

Attachments

XS650 Guy

XS650 Addict

Attachments

XS650 Junkie

Similar threads