For Sale - SOLD 2 into 1 header

Sorry, they have been sold.


Some rust, no dents. what you see is what I got, no muffler. I think there is a muffler available for these but the maker's name doesn't come to mind. They don't look like MAC.... I was thinking $100 plus the ride?

Looks like the one from mikes gary

Hey Gary, could that be a Hooker Header? Back in the mid 70's, Hooker made a 2 into 1 for the 650.

Could be hooker, not a jardine or a MAC..... I don't think it's real old, the chrome is too good.
Dreamer you are probably right, I think it's the mikes pipe. It has the finned clamps, most other pipes just have flanges at the head.

2-1 XS Performance Headpipe Set
2-1 XS Performance Headpipe Set Photo
XS Performance
2-1 Chrome XS Performance Headpipe Set with collector. XS650 (80-84),
1 1/2" OD Headpipes with finned clamp and a collector pipe
(45.3mm.OD)with a slight kick up.
Note: Muffler NOT Included.

In Dyno Development this system with a free flowing muffler
added and unprecedented 10HP+ rear wheel to a completely stock 1980 XS650.

Designed to work with our taper Tip #07-0041 muffler or our
#07-0114 short megaphone or any free flowing muffler that will fit
onto the 45.3mm (1.783") OD collector. This system produces more
power than any other we have tested or developed.

Dyno Test Sheet
Part #07-0767 $255.00 USD Set



I have not touched it, it will probably clean up acceptable if not perfect. Less than 1/2 PRICE of new, and mufflers available.

PM Sent

~kop

Emailed a reply to Kopcicle.

kop and three in line behind him. These are SOLD.

Thank You Gary ;-)

~kop

P.S. nice packing even usps couldn't kill them

I stumbled across this old post and wanted to share the result . Thanks again Gary

~kop

Thanks Kop, it's always nice to see parts back on duty!

did you buy that bike from a guy in Janesville? I was going to look at that bike back in late April from a guy near Madison.

cool bike and pipes. I woulda jumped on that deal. Oh well, maybe next time.

The 82 Heritage special that Andy grabbed?
No I am kinda "bike rich" right now.

No , this bike has been going on for ....

~kop

Location: -122.16541 x 47.14801 resolves a few thousand west of here.

that it does , and needs a 20 mile or so update ....

~kop

Designed to work with our taper Tip #07-0041 muffler or our
#07-0114 short megaphone or any free flowing muffler that will fit
onto the 45.3mm (1.783") OD collector. This system produces more
power than any other we have tested or developed.

Dyno Test Sheet


XS Performance Reverse Cone Megaphone Muffler 18" Photo
XS Performance
XS Performance Reverse Cone Megaphone Muffler - 18" end Dia.
ADJUSTABLE Dyno tuned baffle. All mechanical design (No glass pack).
End cone fastened with 3 screws. Classic chromed sleek & short design, nice tone.
Upgraded adjustable heavy duty slider mount

Fits: Our #07-0767 XS Performance 2-1 Headpipe Set and its 45.3mm
OD collector. Provides the maximum power and is still acceptable for
street use.




Free flowing chromed Taper Tip Muffler
Fits: 1 3/4" (45mm.) headpipes or 1.5" (38.5mm.) headpipes if used with
reducer sleeve supplied. 16" Long. Includes clamp and slider hanger strap.
Non-removable baffle. 1 3/4" ID 1 7/8 OD
Yamaha, Suzuki, Kawasaki, Honda.
Part #07-0041 $45.95 USD Ea




I think I have a pair of these last ones on an 82 HS I just put 60 miles on tonight. They are loud but have good tone, motor seems to like to rev with them on stock special headers. on that set up power lives up around 5500-6500 by the seat dyno.