Hi Everyone,
SO I bought some new Mikuni VM34's got them on my bike started up first try runs pretty well except at full throttle get a little choppy I expect my mains need to be a bit bigger? Here is what I re-jetted to what are everyones thoughts on the stock needle jet with the Mikunis? Should I get a different needle jet?
Here is what was stock and what I am running:
Stock Mikuni as I bought it:
260 MAIN
35 PILOT
159 Q-2 Needle Jet
6DH4 NEEDLE
2.5 slide
2.0 air jet
This is my current Jetting:
180 MAIN
25 PILOT JET
6DH4 NEEDLE
NEEDLE CLIP IS 4th DOWN FROM THE TOP
SO I bought some new Mikuni VM34's got them on my bike started up first try runs pretty well except at full throttle get a little choppy I expect my mains need to be a bit bigger? Here is what I re-jetted to what are everyones thoughts on the stock needle jet with the Mikunis? Should I get a different needle jet?
Here is what was stock and what I am running:
Stock Mikuni as I bought it:
260 MAIN
35 PILOT
159 Q-2 Needle Jet
6DH4 NEEDLE
2.5 slide
2.0 air jet
This is my current Jetting:
180 MAIN
25 PILOT JET
6DH4 NEEDLE
NEEDLE CLIP IS 4th DOWN FROM THE TOP