Wanted - Brembo Caliper or whole kit (Canada ideally?)

lumberjack · Apr 15, 2015

Hey there! New here, and working on a 1979 XS650.... Would LOVE to do a front Brembo conversion, but finding an affordable brembo caliper is proving a tad difficult!

So, if anyone has a used Brembo caliper (the 4 piston one that attached to the Pandemonium bracket), or better yet, has a whole front setup for sale, and you would be OK with shipping to Canada (or you are in Canada already!

), then please PM me or reply below!

LEFT OR RIGHT caliper is OK, I have dual disc forks legs and front wheel, so either side is OK!

Could really use this setup right about now!

Thanks!

figure8 · Apr 15, 2015

Contact Dan at pandemonium, he sells used ones as well as new. Great guy too.

lumberjack · Apr 15, 2015

figure8 said:
Contact Dan at pandemonium, he sells used ones as well as new. Great guy too.

Oh I know, but their website says Out of Stock! (plus, to be perfectly honest, I am on a budget, so a used-used one (if that makes sense? haha) would be just fine for me, to save a few bucks!)

figure8 · Apr 15, 2015

Gotcha, good luck.

Lassesand · Apr 17, 2015

Look at eBay. I picked up a complete set of st4 calipers in the UK with lines and pump for Â£100. I'll try to graft them on my 447 as it has twin discs in front.

lumberjack · Apr 18, 2015

I keep scouring ebay, and it's hard to find a pair that cheap! (I also have the dual disc setup capability, and even have an extra rotor kicking about...so I would do dual up front, but it's hard to find a pair that cheap!)

Lassesand · Apr 18, 2015

Just be patient. They will turn up in a couple of weeks.

hard_y_rd · Aug 24, 2015

You still looking for this kit?

Wanted - Brembo Caliper or whole kit (Canada ideally?)

lumberjack

XS650 Member

figure8

XS650 Guru

lumberjack

XS650 Member

figure8

XS650 Guru

Lassesand

Lassesand

lumberjack

XS650 Member

Lassesand

Lassesand

hard_y_rd

XS650 Guru

Similar threads