clutch adjustment screw.

Well ridding down the freeway today I lost my clutch adjustment screw, lock nut and cover. I can find the cover for sale at mikesxs. I can't find the screw and nut for sale without buying a 60 kit that includes the worm gear and other parts. Anybody have a lead for me.

That screw is a M8x1.25. If necessary, you could fab one from a hardened bolt...

That round chrome cover, you might finds one at your local hardware store. They have round chrome covers like that. You might need to measure to be sure Or carry the let engine cover into the store to test fit to find one.
On the adjuster screw, I'm not sure just how hard it needs to be but making one shouldn't be hard. Get a bolt about two inches long, with threads the full length, cut off the head, cut a slot for a screwdriver.
Check to see if you lost the ball. the hardware store has them too. A 5/16 inch.
Leo

If you are wanting to replicate it the inside end will need the threads taken off about 5/16's(it is "stepped") and dimpled on the end.
Or Richardthemotorcycle1 is parting a motor so you could maybe get all the bits from him.

I replaced the whole assembly when my gear broke, so I might have that bolt. Let me know if you still need it and I'll look for it when I get off work.

Partzilla has it.