The unknown molex connector on my stock 1975 Xs 650

A short time back I was asked to post a picture of this Molex connector which I do not find on the wiring diagram. The wire colors are white w/ red tracer, black, green and brown. I find no corresponding Molex connector for it.

https://www.dropbox.com/s/bhrr7tta0uurb0p/2016-07-28 15.39.42.jpg?dl=0

Hi justifiedman,
well, I don't see that particular wiring combination on my wiring diagram either.
I'd suspect it's a PO add-on. A connection for lights on a fairing or hard bags that ain't there no more?
But if the colour codes were done right, Red/White is switched power, Brown & Green are signals and Black is ground.
Best I can advise is to trace the wires back from the Molex connector and find out what they are connected to.

. 2 things. Pic is out of focus and this should have been posted in your other thread as it is the pic that was asked for.

I have a similar coupling on my TX74A but it has 5 wires.

Interesting. Just dangling there like mine.

I have the same block going nowhere on my '74, white/red, green/red, orange, black, brown. My '74 had a frame mounted fairing on it, but this connector looks factory for sure. I'll be unwrapping this harness soon, maybe something will make sense then?

Scott