IronHeartCycles
XS650 Enthusiast
Happy to release our new high and tight mid-controls for the Yamaha XS650
Our mids use a 3/8" thick mounting plate, with 1/4" thick linkage. All fully tig welded together. To make sure they are smooth and tight we use bronze bushings. Our drum brake setup is designed as a single pivot with no need to have a second pivot point welded to the frame.
Using the stock brake switch light? Don't worry we have you covered. We have hidden a mounting bracket on the backside of the right mid. We like to keep things clean and hidden.
The pull rod that will be supplied with the mid controls, is machined from 3/8" high strength 1144 steel rod. With a tensile strength of 125,000psi. So once you bend it to fit your bike you will not have to worry about flex or stretching. One end is threaded to 6M1.0 so that you can use the stock spring and adjuster nut. The other end will be threaded to 1/4"x28 it will be long enough if you to cut down if need be.
The mids will be shipped with all the necessary hardware to install them.
*Our mids will not work with the stock exhaust! Unless you cut them short.*
*They can be setup to your needs. If there is something you need changed, please contact us at sales@ironheartcycles.com for additional pricing and information.*
The Price is $325
Here are a few pictures. The first few are of our first version on a customers bike. Since then we have beefed them up and fine tuned them.
Here is our final setup.
lol ignore the busted cover...
We are also working on a bolt on bracket for a sport bike master cylinder for everyone running a disk rear.
Our mids use a 3/8" thick mounting plate, with 1/4" thick linkage. All fully tig welded together. To make sure they are smooth and tight we use bronze bushings. Our drum brake setup is designed as a single pivot with no need to have a second pivot point welded to the frame.
Using the stock brake switch light? Don't worry we have you covered. We have hidden a mounting bracket on the backside of the right mid. We like to keep things clean and hidden.
The pull rod that will be supplied with the mid controls, is machined from 3/8" high strength 1144 steel rod. With a tensile strength of 125,000psi. So once you bend it to fit your bike you will not have to worry about flex or stretching. One end is threaded to 6M1.0 so that you can use the stock spring and adjuster nut. The other end will be threaded to 1/4"x28 it will be long enough if you to cut down if need be.
The mids will be shipped with all the necessary hardware to install them.
*Our mids will not work with the stock exhaust! Unless you cut them short.*
*They can be setup to your needs. If there is something you need changed, please contact us at sales@ironheartcycles.com for additional pricing and information.*
The Price is $325
Here are a few pictures. The first few are of our first version on a customers bike. Since then we have beefed them up and fine tuned them.
Here is our final setup.
lol ignore the busted cover...
We are also working on a bolt on bracket for a sport bike master cylinder for everyone running a disk rear.