Shogun187
XS650 Member
I have too many other projects/restorations going on so this one has to go.
The frame is currently in roller form with a factory engine, wheels, fork, TC Bros mini ape handlebars, Biltwell Whiskey throttle, Dime City Choppers Clutch lever.
The frame started as a 1977 XS650. Visual Impact welded and installed their brat kit along with Progressive 412 shocks (11”). They also welded the kickstand.
Two complete engines will be included:
A factory engine from a 1979 XS650 engine with 9673 miles on it; will include original carbs, charging system.
A tuned engine from a 1977 XS650 which includes the following modifications: 277 rephased crank and cam by Hugh’s Handbuilt, 1st oversize pistons – the boring/honing, and headwork were all done by Hoos Racing which includes new valve guides, springs, etc.; Mikuni VM 34 carbs (tuned by TC Bros), Pamco ignition kit, Hugh’s Handbuilt PMA, new seals, bearings, gaskets throughout; new cam-chain, chain guide, new clutch plates, clutch springs, LC Fab clutch retainers. I installed this engine, ran it for about ten minutes total.
I have a ton of parts, some of which I’m sure I’m forgetting. Here’s what I can think of just off the top of my head – new HHB bolt-on oil cooler, new HHB brake lever/master cylinder, TC Bros 7/8” mini apes, HHB Motor Mounts (top and bottom), new TC Bros aluminum intake manifold, HHB Speedster Pipes, TC Bros Two into One Throttle Cable, new AntiGravity battery, spare side cover (clutch side), chrome Frisco bars, factory handle bars, TC Bros Forward Controls Kit, HHB weld-on rear brake mount, three gas tanks – one raw, unprimered BSA Bantam D1/D3 tank, one mid-tunnel Frisco Wassell tank (primered), and one factory Yamaha tank (yellow), HHB weld on headlight mount, Eastern Beaver PC-8 kit,
I still also have several factory parts like exhaust pipes, factory sear, air filter covers, rear pegs, a sissy bar, engine crash guards.
Everything listed above (and some parts I’m sure I’ve forgotten about) will be included.
Hoping to get $3500 but I’m also open to reasonable offers – so let’s work something out. I just want to get rid of everything. Item is located in Columbia, Maryland; I won’t be able to ship. Please PM or Email me at WMartin8446@gmail.com for pics.
The frame is currently in roller form with a factory engine, wheels, fork, TC Bros mini ape handlebars, Biltwell Whiskey throttle, Dime City Choppers Clutch lever.
The frame started as a 1977 XS650. Visual Impact welded and installed their brat kit along with Progressive 412 shocks (11”). They also welded the kickstand.
Two complete engines will be included:
A factory engine from a 1979 XS650 engine with 9673 miles on it; will include original carbs, charging system.
A tuned engine from a 1977 XS650 which includes the following modifications: 277 rephased crank and cam by Hugh’s Handbuilt, 1st oversize pistons – the boring/honing, and headwork were all done by Hoos Racing which includes new valve guides, springs, etc.; Mikuni VM 34 carbs (tuned by TC Bros), Pamco ignition kit, Hugh’s Handbuilt PMA, new seals, bearings, gaskets throughout; new cam-chain, chain guide, new clutch plates, clutch springs, LC Fab clutch retainers. I installed this engine, ran it for about ten minutes total.
I have a ton of parts, some of which I’m sure I’m forgetting. Here’s what I can think of just off the top of my head – new HHB bolt-on oil cooler, new HHB brake lever/master cylinder, TC Bros 7/8” mini apes, HHB Motor Mounts (top and bottom), new TC Bros aluminum intake manifold, HHB Speedster Pipes, TC Bros Two into One Throttle Cable, new AntiGravity battery, spare side cover (clutch side), chrome Frisco bars, factory handle bars, TC Bros Forward Controls Kit, HHB weld-on rear brake mount, three gas tanks – one raw, unprimered BSA Bantam D1/D3 tank, one mid-tunnel Frisco Wassell tank (primered), and one factory Yamaha tank (yellow), HHB weld on headlight mount, Eastern Beaver PC-8 kit,
I still also have several factory parts like exhaust pipes, factory sear, air filter covers, rear pegs, a sissy bar, engine crash guards.
Everything listed above (and some parts I’m sure I’ve forgotten about) will be included.
Hoping to get $3500 but I’m also open to reasonable offers – so let’s work something out. I just want to get rid of everything. Item is located in Columbia, Maryland; I won’t be able to ship. Please PM or Email me at WMartin8446@gmail.com for pics.
Last edited: