Giveaway: Chop Source Frame Jig Kit! (ends 11pm CDT on May 14th, 2017)

Travis said:

Giveaway: Chop Source Frame Jig Kit! (ends 11pm CDT on May 14th, 2017)

Chop Source is giving away another frame jig for the third year in a row! Same rules as the last two times.

View attachment 98750

Win a Chop Source Frame Jig Kit!

To enter the drawing just post in this thread! Existing Members Only! You need to have been a registered member before the date and time of this post to be eligible (this will be verified). All entries from members who joined after this post will be ignored. If you are new to the site, register today to be eligible for future member only drawings on XS650.com.

One entry per person (only the first post by each person in the thread will count). You must post before 11pm CDT on 5/14/17 to qualify. The winner will be chosen randomly from the qualified entries. Shipping will be covered by Chop Source within the U.S. (members located outside of the United States will receive a $21.50 shipping credit). Winner may also choose to receive a $321.45 store credit ($299.95 frame jig + $21.50 shipping) to configure their frame jig with other fixtures and options. International shipping is expensive because the parts are heavy (up to $186.85 for the frame jig as shown above depending on where you live). Use the shipping calculator on chopsource.com at checkout to determine how much shipping will be before you decide to enter the drawing.

The Full Frame Jig Kit includes all of the fixtures and hardware you need to get your table-top frame jig started. You need to supply about 21.5' of 2"x3" or 2"x2" tubing (1/8" wall) for the the jig. The frame jig kit bolts together so you can break it down and store it easily when you aren't using it. No drilling or welding required except for the feet. The neck fixture will accommodate rakes from 15 degrees to 60 degrees.

You will receive the following:
- Neck Fixture
- Axle Plate Fixture
- Two Base Clamps
- 1018 Mild Steel Neck Cones
- Feet Kit
- Adjustable Width Fixture (shown) or Internal Center Fixture
- 3/4" Threaded Rods and Spacers (shown)

Chop Source Full Frame Jig Kit - $299.95 value

For complete details of the Chop Source Motorcycle Frame Jig Kit or to view assembly instructions visit www.ChopSource.com

Good Luck!

Click to expand...

Travis said:

Giveaway: Chop Source Frame Jig Kit! (ends 11pm CDT on May 14th, 2017)

Chop Source is giving away another frame jig for the third year in a row! Same rules as the last two times.

View attachment 98750

Win a Chop Source Frame Jig Kit!

To enter the drawing just post in this thread! Existing Members Only! You need to have been a registered member before the date and time of this post to be eligible (this will be verified). All entries from members who joined after this post will be ignored. If you are new to the site, register today to be eligible for future member only drawings on XS650.com.

One entry per person (only the first post by each person in the thread will count). You must post before 11pm CDT on 5/14/17 to qualify. The winner will be chosen randomly from the qualified entries. Shipping will be covered by Chop Source within the U.S. (members located outside of the United States will receive a $21.50 shipping credit). Winner may also choose to receive a $321.45 store credit ($299.95 frame jig + $21.50 shipping) to configure their frame jig with other fixtures and options. International shipping is expensive because the parts are heavy (up to $186.85 for the frame jig as shown above depending on where you live). Use the shipping calculator on chopsource.com at checkout to determine how much shipping will be before you decide to enter the drawing.

The Full Frame Jig Kit includes all of the fixtures and hardware you need to get your table-top frame jig started. You need to supply about 21.5' of 2"x3" or 2"x2" tubing (1/8" wall) for the the jig. The frame jig kit bolts together so you can break it down and store it easily when you aren't using it. No drilling or welding required except for the feet. The neck fixture will accommodate rakes from 15 degrees to 60 degrees.

You will receive the following:
- Neck Fixture
- Axle Plate Fixture
- Two Base Clamps
- 1018 Mild Steel Neck Cones
- Feet Kit
- Adjustable Width Fixture (shown) or Internal Center Fixture
- 3/4" Threaded Rods and Spacers (shown)

Chop Source Full Frame Jig Kit - $299.95 value

For complete details of the Chop Source Motorcycle Frame Jig Kit or to view assembly instructions visit www.ChopSource.com

Good Luck!

Click to expand...