littlebill31
Smells of Raw Fuel
Well, I have tried everything I can think of, but the timing is still too advanced.
Fresh top end rebuild
Brand new Pamco, advance rod, springs, weights, coil, wires plugs, everything, complete kit from Mikes.
Advance mechanism snaps back like it should.
Not sure what is going on, but at 1,200 rpm idle, you can see where the line lands at full retard on the Pamco.
I took everything apart, double checked, took off the rocker cover and checked the cam alignment. Dead nuts, 12 0'clock on TDC line.
....
Fresh top end rebuild
Brand new Pamco, advance rod, springs, weights, coil, wires plugs, everything, complete kit from Mikes.
Advance mechanism snaps back like it should.
Not sure what is going on, but at 1,200 rpm idle, you can see where the line lands at full retard on the Pamco.
I took everything apart, double checked, took off the rocker cover and checked the cam alignment. Dead nuts, 12 0'clock on TDC line.
....
Last edited: