-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
PAMCO 10th Anniversary New Product
- Thread starter pamcopete
- Start date
pamcopete
Ride.Enjoy.Life is Simple
A few details. The 10th Anniversary E-Ignition will be available next week for $198.95.
The installation is the same as the original basic PAMCO, but new instructions will be posted. It will also be available with the 12mm aluminum advance rod for the '80 to '83 models. The E-Ignition includes the mechanical advancer substitute cap to completely eliminate the mechanical advancer. If you currently have a basic PAMCO with the 60 degree rotor, you can order the new E-Ignition for $169.95 and reuse your 60 degree rotor.
The installation is the same as the original basic PAMCO, but new instructions will be posted. It will also be available with the 12mm aluminum advance rod for the '80 to '83 models. The E-Ignition includes the mechanical advancer substitute cap to completely eliminate the mechanical advancer. If you currently have a basic PAMCO with the 60 degree rotor, you can order the new E-Ignition for $169.95 and reuse your 60 degree rotor.
Last edited:
peterg
XS650 Addict
Thanks 5Twins.
Pete - will the new unit be available through xs650direct.com?
Pete - will the new unit be available through xs650direct.com?
wherearewe
Rub on Ya Titties
Nice work Pete! Great addition to the product range. Add me down for one when they are available.
This is going to be perfect for my bobber, what with the single cable coming out and all. I can use my e-advance on my stock budget build, where wires are far easier to hide.
pamcopete
Ride.Enjoy.Life is Simple
Anniversary E-Ignition now available!
Last edited:
Rented Mule
XS650 Enthusiast
This unit will be my number one purchase on my XS650 build shopping list.
pamcopete
Ride.Enjoy.Life is Simple
Installation instructions have been posted for the new E-Ignition.
Last edited:
peterg
XS650 Addict
Pete
I'm looking forward to using this on my next build. My current bike has the previous Pamco and E-Advance and is the best thing I did on the build.
FYI. There is a small tyop on the link that takes you to the Installation Instructions.
I'm looking forward to using this on my next build. My current bike has the previous Pamco and E-Advance and is the best thing I did on the build.
FYI. There is a small tyop on the link that takes you to the Installation Instructions.
pamcopete
Ride.Enjoy.Life is Simple
peterg,
OK. Thanks for the heads up. It's fixed now. You may have to refresh your browser to see the correction.
OK. Thanks for the heads up. It's fixed now. You may have to refresh your browser to see the correction.
pamcopete
Ride.Enjoy.Life is Simple
Now available as a complete kit.
Last edited:
Part 14-0907B, Isn't this kit for the 80 and later XS650 models...................
pamcopete
Ride.Enjoy.Life is Simple
Yes, that is essentially what it is for.
Last edited:
littlebill31
Smells of Raw Fuel
Mikesxs might want to change the picture on their site. When you scroll through, you see the one with the separate E-advance, so it's not easily found
On a side note, Pete. I ordered one of your new systems the other day.
On a side note, Pete. I ordered one of your new systems the other day.
pamcopete
Ride.Enjoy.Life is Simple
littlebill31,
Your E-Ignition is on its way., Thanks.
Your E-Ignition is on its way., Thanks.
Last edited:
littlebill31
Smells of Raw Fuel
Before I go any farther.
Are the two cam/advance rod locating pin slots supposed to be this far off from each other?
Are the two cam/advance rod locating pin slots supposed to be this far off from each other?
Last edited:
pamcopete
Ride.Enjoy.Life is Simple
Yes.
littlebill31
Smells of Raw Fuel
Thanks, Pete.
I will add that the stock locating pin on the cam needs to be modified in order for this to work. My stock pin and the several I have from Mike's don't fit in the groove on the advance replacement rotor. They need to be cut down as they are too long.
...
I will add that the stock locating pin on the cam needs to be modified in order for this to work. My stock pin and the several I have from Mike's don't fit in the groove on the advance replacement rotor. They need to be cut down as they are too long.
...
