Wanted, complete front fender with brace and stays. Rust is OK, expecting to paint or powder coat.
Scott
Scott
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Wanted - '73-'75 Rusty Complete Front Fender With Brace & Stays
- Thread starter mrtwowheel
- Start date
Bump........No shipping box necessary, just remove the stays, wrap up the fender with cling wrap, place the stays inside the fender, wrap the stays to the fender, ready for a shipping label.
Scott
Scott
https://grandrapids.craigslist.org/mpo/6521172448.html Maybe give this guy a try if you're close. Looks like he's got quite a selection.
Thanks for the link Beags64. That would be a 260 mile round trip for me. Seems that the seller wouldn't be much help in identifying the right fender. Could be a wasted trip, too bad he's not closer. I'm thinking about it.
Scott
Scott
Bump..........Still looking for fender with both stays.
Scott
Scott
Heads up. 73 is a stand alone one year guard. The braces are shorter on the 73TX compared to the XS2 front guard...................i'm sure the guard is the same for the 72/73 and the braces/stays would interchange, it's just the braces/stays that are a different length
Then I need help Skull. Should have known better than to trust a Yamaha parts fiche.
Brown, '74 TX650A, I totally forgot that there are '75 fork lowers on it now.
So, to get the right fender/guard with front and back stays/braces, I should look for '74 and '75, Right?
Scott
74TXA Guard,............................74TXA-75B Parts file....................................................76C parts file
Guard has ridged lip running down the sides
76C parts file
74-76 type front guard
https://www.ebay.com.au/itm/YAMAHA-...765058?hash=item283ff5cc42:g:dyAAAOSwiVhZwFLK
https://www.ebay.com.au/itm/75-YAMA...092551?hash=item33d67177c7:g:q1cAAOxyNo9Ss0wQ
72XS2...............Rolled edge on the guard and note where the stays attach to the fork leg
73TX........Same guard-rolled edge....shorter stays due to stay mount being higher
Guard has ridged lip running down the sides
76C parts file
74-76 type front guard
https://www.ebay.com.au/itm/YAMAHA-...765058?hash=item283ff5cc42:g:dyAAAOSwiVhZwFLK
https://www.ebay.com.au/itm/75-YAMA...092551?hash=item33d67177c7:g:q1cAAOxyNo9Ss0wQ
72XS2...............Rolled edge on the guard and note where the stays attach to the fork leg
73TX........Same guard-rolled edge....shorter stays due to stay mount being higher
Last edited:
Similar threads
For Sale -
1980 XS650 Special For Sale
