Wanted - PAMCO WITH E-IGNITION

timbeck

HARDLY A GURU
Top Contributor
XS650.com Supporter
XS650.com Supporter
Messages
1,168
Reaction score
1,470
Points
163
Location
Boston,MA
I AM LOOKING FOR A PAMCO WITH THE E-IGNITION TO REPLACE MY CLAPPED OUT ONE. ANY HELP IS APPRECIATED, THANKS
tim
 
I believe the E-Advancer was with the small blue box and the E-Ignition is all built onto the ignition plate.
tim
 
The final edition was both on the plate under the cam end cover.
 
Thanks azman, that's the one that I am looking for.....or I need to consider a Boyer or what ever is going to be the "go to " ignition system......
tim
 

650skull I checked with Pazon and they do not offer an ignition system for our bikes but maybe in the future.

email from Andy at Pazon below:

Hi J-C,


Thanks for contacting us.


As you may know, we don’t make ignitions specifically for the XS650 at present (we have an ever-growing to-do list!).

The nearest kits we have are the ones for the British twins (Sure Fire, Altair or Smart Fire).


The trigger assembly for the British twins is 68.1mm diameter.

The contact-breaker assembly for the XS650 is an unusual shape, so some ingenuity would be required to get our trigger to fit (perhaps mounting onto the bare original contact-breaker plate), all held in place with suitable spacers and bolts.


Our rotor has a male taper, so this also would need to be modified to suit (perhaps machined from tapered to straight).

Some M8 studding, nuts & washers would also be required to lock our rotor into the camshaft.

(Our rotor has an M8 centre thread).


We will let you know if we do develop a system specifically for the XS650.


Best regards,

Andy Perkins

PAZON IGNITIONS LTD.

Keeping Classic Bikes on the Road

www.pazon.com
 
Skull, I also sent a note to Pazon and got the same answer. Andy did note that he has had a few inquiries about XS650's so who knows
tim.
 
Back
Top