Looks a neat setup, still uses mechanical advance. If it’s reasonable price, but for the extra bob or two, Boyer for me. Looking forward to the remainder of this story.
The project on the lift has a new Pamco that's never been hooked up, 79 with mech advance., no coils or charging system on it yet.gary, are you putting it on a bike with a pamco charging system? are you using stock points style coils??
billy icon, A bit of clarification, the Pamco is an ignition system, not a charging system.
Is this Trytonic system just the sensor plate as shown or is there a box to go with it.
If just the sensor plate, perhaps there is are transistors tucked away in the windings. The magnets cause enough current in the windings to trip the transistor. If so then you would use two stock coils.
The plate has three wires. One to each coil and a ground.
The Martek, I think that's what brand the one I put on my first 75 in about 78 was. It had a sensor plate and box but used the stock coils. Used the stock advance unit.
Leo
I was distracted read nails and working on her bike.
am I mistaken or does the honda in that video have a dual output DYNA coil?? anyone?