Right side case torque settings

What should I torque the 6mm side case screws to ?
I don’t want an oil leak but I don’t want to pull the threads out of my center cases.
Thanks

7 foot pounds.

You don't even need that much. For quite a few years I was using 80 in/lbs and it always worked fine. Since I lube the screws with anti-seize, I've begun reducing that, down to around 70 in/lbs now, and it's working fine so far as well. To get the case oil tight, it's not so much about making all the screws super tight but rather about making them all the same.