Well at least if you forget the screwdriver in your back pocket you won't hurt that seat cover!
Well at least if you forget the screwdriver in your back pocket you won't hurt that seat cover!
Know it all!Valve springs?
That'd be my choice.I've heard about using oven cleaner
Assuming that the Shibaura engine rotates in the standard CCW at the flywheel end, that means it will have to be mounted ass-end to like the Yanmar was, and I'll have to figure a way to hook the driveshaft to the nose of the crank.
...sort of like a WW-II Italian tank.
Life has gotten in the way, probably be the first of the week before I get back to it.
Been on a neatness mission (not even close to Mailman Standards, but neater than usual for us) as we have a showing this evening.
Tomorrow will be spent replacing the gutters and fascia board on the front of the garage. Gutter has been leaking and I've been meaning to fix it for 2-3 years. Unfortunately, the 30 year old pine behind it has rotted from the wet leaves and such so it all needs to come off and be replaced. That may well extend into Sunday, weather permitting.
Care to guess what 100 feet of 1x6 pre-primed pine (enough for front and back) and 50' of Plasmo gutter and assorted fittings (front only) set me back?