I just wonder, could this have been you some time ago?
I know it was a joke an all, but since it was brought up I've never been that enamored with just driving places. I like building and working on cars, but actually driving is boring 99% of the time. Hoping to get actual track time with this though because that should be actual fun.
When I got to the shop this morning one of the guys from up front almost immediately came back and asked about the dash bar and why it was so high. Laughed and went through the whole explanation about the engine height and sitting higher in the chassis than people expect and all that. He then asked if I was married to that particular engine or if I could use something different to lower the front end
Got the toe bar attached first thing this morning. Then started putting on the upper chassis bars.
Switching now to one inch square tube for this upper level. The idea being to add stiffness to the chassis, especially the rear bit over the axle. It was about this point where I realized that the pictures are getting less and less easy to discern. There are enough tubes now everything seems to be blending in with the background
The top row of square put on I started the diagonals. Triangles mean strength, they also mean difficult to get weld into the corners. The two guys I'm usually there with both took off early today so I was working as long as there were people up front, without a key I had to be out before everyone up there left. That means I left off with most of the diagonals welded, but not all the way. It still made for a full day. Things go pretty quickly when it's just connecting points with straight lines though and that made things real nice today. It feels like a lot changed,