I cant seem to get my carbs dialed in this year after the top end rebuild. I can get it to idle starts first kick pretty much every time, but cant seem to get the 1/4 to 3/4 throttle to pull without sputtering/chugging.
stock bore top-end
pamco ignition,
bs 34 xsjohn needles now at 137.5 mains, 47.5 pilots, 2 clip from top on the needles...but been all over the place with mains and needle clips, 3 1/4 out on the mixture screw
check the diaphragms
timing set and checked again,
carbs clean
ditched iridium plugs back to bp7es
Just trying to get some other opinion, ideas....been alot of nice weather Ive missed.
stock bore top-end
pamco ignition,
bs 34 xsjohn needles now at 137.5 mains, 47.5 pilots, 2 clip from top on the needles...but been all over the place with mains and needle clips, 3 1/4 out on the mixture screw
check the diaphragms
timing set and checked again,
carbs clean
ditched iridium plugs back to bp7es
Just trying to get some other opinion, ideas....been alot of nice weather Ive missed.