Thank you @5twins.
I noticed this on my right side case last night. Down where the tach cable comes out it looks like a weld to fill a hole was made. Also it looks...
Is this the normal wire routing for the rear blinker? Noticed it sticks out a bit with the seat on.
Ok, I think got it. My bike had brass washers on it when I bought it. What I'm seeing is the remnants of some rubber washers that were on it...
Pulling the top end off I noticed these trashed plastic seals on the stud bolts. Couldn’t find them in the parts fiche and didn’t see them used...
Thanks @5twins. Two more valve springs to pull and the top end is ready for a long overdue cleaning and refresh.
I don't want to create a build thread because I don't know what I'm building or doing for that matter, might start that once I get to the...
I pulled the head off and looking to get any input from on what you all think. I see the ware marks from the cam but they feel smooth, no flat...
This is probably one that hasn’t seen oil the 30 years. In fact I think it is the only place oil isn’t leaking into or out of on the bike.
Thank you @5twins, Excellent right up and pics. Wish the manual was as thorough.
Mine was rusted on but, I think I got it off with out damage to...
Thanks, will PM you tonight.
Thanks. I’ll skip the washers and get the clips from Mikesxs. It was very dry and a little rusty in there so I’ll add little lube when I reassemble.
Anyone have a source for the small washers and clips for the governor assembly?
Never mind, found some kids video, very helpful. All good.
I got the ring nut off the advancer, how does the plate come off behind it? Same way?...
Mystery solved. Washer plate was missing from the bottom of the tack drive.
I have another contender to look at tonight, the washer plate at the bottom of the tach gear.
I also noticed on the kickstarter shaft...
Will look at that after work.
Separate names with a comma.