I have got my bike torn down for a top end rebuild. I am ordering first over pistons and rings and was looking for a shop to bore my sleeves,clean...
Thanks for the input twomany. If I am following what your saying then I need to move my caliper more rearward and make a longer bar or move my...
I fabricated some forward controls,welded in some neck gussets from HHB, and made a set of ape hangers out of conduit(just for looks) to try and...
I was really fond of my wassell style tank, but it just doesn't follow the lines like I wanted. I am more into a retro type bike, and I guess the...
Keep in mind that from this point on most everything is just mocked up. Got started swapping everything over and immediately regretted buying...
Then I ran across a decent deal on another frame with a TC Bros hard tail aready welded on. Its not my favorite tail by far. I think the lines are...
I kinda got into this a little ways before thinking about posting it on the forum. I imagine no one is going to be blown away by it anyway. It's...
Thanks for replying. I ended up just going with a HHB pma. Saved a lot of hassle. I've pretty much got it all sorted out now. Tank had built up...
Following
It is capped off and isolated as far as I can tell. I haven't actually taken the side case off I have just been working through the alternator...
I think I have tried all I can manage. I have done all the tests and they appear to be okay except I only get the 11 or 12 VAC when going from...
I should have mentioned that I had done that. My lead are .4 ohms. The 1 ohm was after adjustment for lead resistance. The only thing that really...
Alright. I have 1ohm phase to phase. No continuity to ground. Does that mean I am dealing with a bad stator?
Alright here is an update on what I have tried and what readings I came up with. I used the diagram that daddygcycles posted above. I verified...
No. Scratch that. I do need the one nylon screw because thats the one with voltage, I imagine a metal screw would ground through the threads and...
Thanks so much for the response. After looking at those links it appears I have a later model rotor with late brushes. I think from reading that...
Just wanted to say Hi and post a few pics of my new to me mostly 1979 xs650. I have been lurking for awhile and realize there are some on here...
Separate names with a comma.
