Search results

Sold!!!!

For sale is a Pandemonium Choppers adapter plate for 34mm front end, bracket has been powdercoated black, Brembo caliper in good shape with good pads, and a Nissin master cylinder/lever(I believe off a GSXR) that has been modified to work with 1" bars. $150 shipped.

I appreciate all the help from everyone so far and thanks for being patient with my questions. I'll pull out my manual and go over it thoroughly.

Direct to the battery? Would that make for a draw on the battery?

I'm not at the shop currently but I'll check out the rotor for any markings/names/numbers etc a little later. I'll do a little research on the nylon screws as well.

I found the VR115 on Autozone's website but it appears to have 4 wires, not 3. From the pic they appear to be red, green, yellow and black. :confused: Could you possibly point me in the right direction for the proper regulator and rectifier? Here's the link LINK Also, I did some...

Redone with corrections to the Pamco from Pete and corrections to the starting system as posted DogBunny. Still curious about 2 things. 1) the missing brown wire, guess I'll have to order a whole new regulator. 2) Also regarding ANLAF's correction as well. He references the missing brown...

Blue = Negative, Black = positive, that's stange. I'll make the changes regarding the pamco that you mentioned, I'll redraw the diagram now. Unsure if my regulator is stock or not. The model number on the back side of it is posted in the diagram if that means anything. The previous owner...

I just used Microsoft Paint is all. I'll redraw the diagram using the corrections mentioned, standby for more critiquing. :thumbsup:

I know, search, and I have and have ended up even more confused. I think I have this correct but I'm looking for confirmation as well as have a few questions. The specs: 72 XS650 Pamco Ignition Using 4 pole ignition switch Previous owner had wired it but alot was half-assed so I...

Got it..................

A local car/classics/hotrod/chop show this weekend has an Under Construction class and the winner will get a $500 powdercoating gift certificate. I was going to the show regardless so I think I'm going to bring the bike along. Last night I stripped the tank(because I had to do it eventually) and...

Not really much of an update but you can sorta see the direction it'll be going. A big local car/hotrod/chop/rat rod show this weekend has a "Under Construction" class and the winner gets $500 worth of powdercoating. I'm going anyway so I figured I may as well blow the dust off and make it look...

Found everything already.

Got everything I needed, thanks!

Sure, PM me your paypal info and I'll send payment.

Looking for good condition/working electric starter motor and relay. Let me know what you have and priced shipped to 70583. This will be going on a 72 if that matters any. Thanks

I've been working on this one for 3 years now, it's taken longer than I hoped but it's slowly nearing completion. Oddly enough while sorting through my box of parts last month I noticed the one thing missing happened to be a caliper.

XL Forum is pretty good for Sportsters. It's a bit tough to navigate but there's alot of good information and knowledgeable posters there.

I have a Sportster as well. They're good bikes and can be picked up fairly cheap. My girlfriend and I took the Sportster to Downtown Alive in Lafayette on Friday night and while walking through the crowd of bikes there was a basically all stock XS in the crowd. I waited around to see if the...