Search results

Machine Nice. I replace the pads don't remember what I used but I bought them from Mike's XS. So that could be part of it. And I replaced the brake lines with stock Replacements from Mike's as well. Sounds like I should order some different brake lines.

Here is my front rotor.

Okay. This was my first motorcycle. And I put about 2,000 miles on it. I really had nothing to compare it to so I never noticed anything about it. Recently I had the opportunity to borrow a friend's Suzuki drz400sm. Very fun. A lot newer a lot lighter. Now I feel like my bike doesn't stop...

It's back together! And working! I'm going to go eat dinner now! Thanks all!

I just didn't want the Piston to go flying across the room and getting ding up from being banged around. I just needed it out far enough to put some brake fluid in there. I think is the answer to your question.

Right so smart! Somebody yesterday or the day before told me I was hired. But I'll tell you one thing for sure I definitely got fired today when it was time to bleed the master cylinder.

Jim, First off Gary whoever he is is an effing genius!:bow2: Second you probably knew this but you don't want to put your finger between the caliper and the Piston when using compressed air. Because you will stop at the piston from flying across the room but your finger will not feel very good...

Lol right I thought of that and then chickened out for fear of causing more problems and extending this project any further.

Okay I got it out of there. Should I lube it up with anything besides brake fluid?

All good info. I'm not giving up on this master cylinder yet. I'm going to try Gary's method. I think that's his name. Question: How hard should it be to remove the Piston from the caliper? I'm trying to pull that thing out of there won't come out.

What are the chances that this master cylinder is just no good.

Yes I have done that before. On cars. The access master cylinder seems to be a more fickle than a car master cylinder. Thanks I'll keep at it.

Is there a trick to getting the front brake master cylinder and brake system bleed?

Well down the rabbit hole I go. I was going to do a real rough job on this not paint it and just replace the seals. Because it was working before I sprayed it down with brake clean. But I have come this far. I decided to submerge it in metal rescue. To see if I could remove the rust from the...

Machine No joke! Hot water and a dab of sope.

Yes this is my first Yamaha but I did suspect it was right hand threads and I have had that mirror off before so I knew that but thanks for the heads up.

Couple of questions one does anybody make a replacement master cylinder reservoir. Mine will still work it just looks like DS. 2 the large metal washer at the bottom of the reservoir is fairly corroded is this normal can you replace it is there anything you can coat it with to keep it from...

Thanks mailman,

Machine, Wow that bike is kleen AF! And your master cylinder is in such good shape. Thanks for the tip on the rebuilt.

Then follow this link step-by-step somebody's already done all the work showed you how to do this. Lol http://www.xs650.com/threads/master-cylinder-rebuilding.7862/ Thanks 650skull for sharing this link with me. And littlebill31 for the awesome thread showing us how to rebuild our Master...