Search results

  1. bonesaw

    Clutch push rod seal just fell out?

    Alright, new seal in with hondabond. Longer push rod installed. Everything is fine proving my theory of the seal and bushing being extremely worn and just finally gave out. I followed the forum here,softened the edges around where the seal goes,I was just about able to push bushing in,light...
  2. bonesaw

    Clutch push rod seal just fell out?

    Trying to show the play in bushing around rod Worn seal Leak down test okay,no oil on plugs. Breather hose replaced (stole it off the wife’s 75 ) Inspected seal further to find a wear through on one side,also the bushing and the rod had a trumendous amount of play from side to side. Softened...
  3. bonesaw

    Clutch push rod seal just fell out?

    It was when I parked it l for the season,maybe something made a home in it.im gonna double check it when I get home from work,thank you.
  4. bonesaw

    Clutch push rod seal just fell out?

    I’ll do a compression test tonight. Thankyou
  5. bonesaw

    Clutch push rod seal just fell out?

    Yeah I never did that when I built the motor.ive read the threads on the process,haven’t ran into an issue until now lol. Thanks pal
  6. bonesaw

    Clutch push rod seal just fell out?

    I found some dates threads on here but I haven’t specifically come across what happened to me. I kicked the bike after it had set a while and to my surprise a giant puddle of oil and a trail down the road until I noticed. Pulled charging side cover and the seal around the push rod fell...
  7. bonesaw

    Turn signal relay/pamco Pete/high output Install

    Thanks fellas!
  8. bonesaw

    Turn signal relay/pamco Pete/high output Install

    have pamco high out our system on my chopper and told the ol lady to buy the system for her stock 1975.. Hitting a wall with the turn signal relay being in the way of where I want to put the new coil,( how pamco says to install with two ground clamps) Can I bypass this big bulky trash can? Or...
  9. bonesaw

    Pandi.ya mama exhaust/big bore.

    I do not have any pictures handy,I'm currently at work. My Instagram is @Huney__Bear (justin owens) you might be able to get an idea there of the look with the bigger fins and exhaust. The exhaust did fit for me,if I remember right it was approximately 1/16 between right side pipe and the fins...
  10. bonesaw

    1-2 intake

    Thanks bud!
  11. bonesaw

    1-2 intake

    Thinking of making a 1-2 intake manifold for my xs. Anybody have any pros/cons about this? I'm curious if anyone's done it with a similar setup to my bike and how it ran/worked out. Spec: 80 xs650 750 bore Performance cam Pamco Hall effect HHB Pma
  12. bonesaw

    Carb sneezes and shuts bike off.

    Switched plug wires and a different time I switched carb bodies.still sneezed/coughed on the same side. Thinking partially clogged petcocks (gravity fed) Also re checking my valves,for the 45th time.
  13. bonesaw

    Carb sneezes and shuts bike off.

    Just noticed my petcocks are both leaking while shut off. Could this be an issue?
  14. bonesaw

    Carb sneezes and shuts bike off.

    What is your opinion on the mikunis? That and possibly a new ignition/coil are on my next list
  15. bonesaw

    Carb sneezes and shuts bike off.

    Thanks for the reply,I'm really at a loss with this thing. I put so much money into it and get nothing in return.half the fun is building it,but I'm getting no play either.. I retard'd the timing 2 degrees and the problem was still there,if not worse. I advanced the other way 2 degrees from...
  16. bonesaw

    Carb sneezes and shuts bike off.

    Okay,adjusted my valves to the cam specs. Shot timing with a light to varify. Starting to think it's my pamco Hall effect ignition or my coil? Bike runs when throttle is pulled and dies sometimes on decel. Always the problematic right side of the bike. Pull plugs and they look okay...
  17. bonesaw

    Carb sneezes and shuts bike off.

    ......I think I set the valves this spring to stock settings,forgetting that there where different clearances for the cam.
  18. bonesaw

    Carb sneezes and shuts bike off.

    Problem: right carb sneezes and stumbles the bike to a stall. Idle is low because of the cam and if I set my idle any higher I get a hanging idle on deceleration. Why would one sneeze? Improper adujstment of the mixture screw? Tried dead cylinder method, the right carbs mixture screw is...
  19. bonesaw

    Pandi.ya mama exhaust/big bore.

    [/URL][/IMG] [/URL][/IMG] [/URL][/IMG]
Back
Top