Search results

CRG's are well worth the price. Get one. p!nK

So the headlamp and headlamp wiring should be my first suspect (only saying this because the head light did not come back on when I replaced the main fuse) p!nK

Riding home from a buddies last night, bike running very well. All of the sudden, black. Nothing. Coasted off to the side of the road and walked it to a safe place to work on it. Found the main 20A fuse blown. Got a lift to a gas station to get a replacement. Popped it in and it started...

I did that on a moped I had when I was 13. Still have the scar and a spot on my leg where hair will not grow, never did it again (knock on wood). p!nK

I'm in. p!nK

I do whatever keeps me out of the intersection or the car in front of me. A,B,C, or a combination of any or all of them. Every situation is different. p!nK

Used pretty much the same method. I used the depth gauge on my drill press to make the dimples..... Untitled by Matt Francosky, on Flickr p!nK

Whats the best way to check for air leaks? I have always just used a can of brake cleaner and spray around the suspected areas listening for a jump in rpms.

Went for a cruise this evening. Bike started fine, like always. About 10 miles out I noticed that the RPM's were hanging around 3k, then would slowly drop back down to idle speed (I have my idle set at about 1500). I also noticed a bit more backfiring than normal on decel. No noticeable loss...

http://www.xs650.com/forum/showthread.php?t=9190 See my last post in that thread. It is a simple $0.95 fix. I rode around on that cable all summer without any issues. I recently swapped it out for a ez-pull from 650cent, the only reason I did was due to the fact that I was swapping out my...

Why did he stop at 48? My dad always use to say "just because you can, doesn't always mean you should" p!nK

Whenever you do something that puts your body in a new positon for any length of time there will be genernal discomfort for a bit due to using muscles and flexing in a way you are not used to. It will lessen, you just have to ride through the pain for a bit. Now I am not saying that cafes are...

Anyone know the correct size and pitch of the chain tensioner bolts located on either side of the rear wheel. Previous owner must have swapped them out at some point and they do not match.

See if this guy is available to help you move it... http://www.cbc.ca/news/canada/british-columbia/story/2011/08/25/bc-dangerous-fridge-load.html p!nK

As the title says. I need to remove about 8" out of my speedo cable, possible? If not, what are my options? Having 8" of extra cable dangling around my front wheel does not sound safe to me.

Have you tried talking to them? :shrug: What exactly are you trying to find out? p!nK

I routed mine all the way from the brake caliper to the master cylinder. I highly suggest it. p!nK

Thanks for the chance. p!nK

When my clutch cable broke a month ago I simply went to Lowes and bought a 1/4" cold rolled steel tension pin, cut it in half (length wise), drilled a hole in the open part big enough for my cable to slide into, then brazed it in place with Harris Safety Silv 65 and flux. Did it all on the...

Want to mess around with making a cafe seat for my 83, do not want to tear apart my perfectly good seat in doing so. Any condition as far as the padding and cover goes, good workable condition for the seat pan. PM me here. Must be willing to ship. p!nK