Search results

I dedicated this week to check a few items out on the XS650 and build a few protos etc. Any input on the following items/issues would be helpful "wish it was like this, should've been like that" etc example cooler hidden or not hidden? #1 Oil filter microns affecting oil pressure at...

What's your favorite oil to use and why?

I have no experience, other than hearing one, with a XS650 rephased motor. I have seen some pretty healthy claims of power gains that are out in left field. Although, its clear the XS650 community has "vendors" that are fabrictors in the shop and fabrictors in the story telling department. Ive...

Looking of Wheelbase info for different years and for custom hardtails etc. I'm doing the trigonometry to come up with a chart for Headtube angle vs wheelbase vs fork tube spacers vs frame clearance vs wheel sizes. With this I'll be able to ensure consistent performance regardless of rider size...

1-1/8" 2x2 CNC'd tubing blocks qty 2 for $45 1-1/4" 2x2 CNC'd tubing blocks qty 2 for $50 These are brand new. I have a ton sitting around shop. I also have 5/8 to 2". They are used for phasing and mitering. I have some 2" Cones. They all are drilled and tapped for back purging with a 3/4...

I have a not so gorgeous seat for an 80. $10 plus actual shipping. Lower 48 and paypal only. The two photos show the worse of it.

I'm currently building a XS650 for a customer. Intent is to maintain the stock motor, electrics and carbs. The motor will be fresh. I came across a few coils. One the offers a stock fitment for TCI models. My problem is it says it can have a possible output of 82k What are people doing...

Posted via Mobile Been told that SOME TCI box's are repairable. Told the driver/transistor is typically the culprit. Anyone have one that's bad I could get my hands on?

Cleaning up a bit. HeadTube pucks and cones. Dummies axles. Tubing blocks for mitering and phasing so you can put multiple bends consistently. Odds and ends. Posted via Mobile Posted via Mobile

Interested in knowing the stock specs for all years- Axle to crown- center of axle to bottom edge of lower bearing race. Fork offset- Heat tube center line to center of axle Are spec's loaded or unloaded? what's the sag suggested?