Search results

Yes, it was a "SWAG"....SPECIAL WILD ASS GUESS because it didn't actually weigh each piece. Hell, just removing the stock battery and replacing it with a Shorai saved at least 5 pounds. The Shorai battery weighs just under 2 pounds but has 220 CCA (cold cranking amps). The stock handlebars...

Pipes and related mounting hardware, crossover, double wall header pipes, grab bar, seat, metal fenders, center stand, alternator, complete wiring harness, rectifier, both coils, headlight, taillight, speedometer, tachometer, indicator panel, turn signals, both vacuum fuel petcocks, handlebars...

This was a 1979 XS650S/F Special. It is now a 750 with 34mm round slides, K&N, Shorai battery, Pamco electronic ignition, 2 into 1 exhaust, external oil cooler, nothing is stock. Full bare frame build. About 100 pounds lighter than stock! Starts with a touch of the button. This bike was...

Here's a shot of my XS tracker style. The frame is 1979 but the engine is 1972-1979. Big bore 750 kit and 34mm round slide Mikuni's make it scat pretty good! It you stare hard enough at the starter button, it will start! I am SELF NOMINATING for the 2021 calendar. Hopefully others will...

Yes, I do have a head. $75

I do have a cam and rockers. I will take $65 for the cam and all the rockers.

Like I said earlier, I DO have a head. It is complete with valves and springs but is plenty dirty but looks to be otherwise useable. I had purchased a complete engine about a year ago just to get the transmission so I have a left over top end. I'll take $75 for it!

I do have a head. I'm not sure of it's condition. I will inspect it and get back to you.

I will go look and get back with you asap!!

Hey EPT, I'd take $150 for the cylinders and pistons plus freight. Very honestly, they really do have only about 3500 miles on them!

Check out this list of XS650 engine parts. Need the room in my shop so they are going CHEAP!! Here is a link to my Craig's List ad in the Dallas, Texas area. https://dallas.craigslist.org/dal/mpo/d/little-elm-xs650-yamaha-engine-parts/6773250520.html

Absolutely THE BEST gas tank coating money can buy!! Don't bother with the "Crème" stuff. It is pure junk and unreliable. Check out this link and buy the BEST. The inside of my tank looks like it is now coated with glass! Check it out...

VM34 question. Could anyone give me a head start on tuning this brand new pair of VM34 round slides? I purchased them brand new from Niche Cycle Supply and they are SUPPOSED to be "PRETUNED" for XS650's. I got the bike running but it seems excessively rich and the venturie looks like it...

Don't laugh! JB WELD the hole carefully after cleaning it thoroughly with B12 or some other carburetor spray. Be sure you mix it properly. Work it into the hole with a toothpick then smooth off he excess. Let it cure for at least 24 hours. Use your float bowl as a guide and CAREFULLY drill...

I'm looking for an XS1, XS1-B or XS-2 tank in reasonable condition..............

Plenty wicked looking ride! Plenty creative and I can see that you put your heart into it. But on the down side, you won't see me on a bike without a front brake!

I'm a bit confused. Are these pipes the ones from Mike's XS? I like the 2 into 1 look and I also like the reverse cone muffler. Please advise....