Search results

Hey guys, so I just went to replace my clutch cable (previous one broke)! With a new one from 650 central that was supposed to be a little shorter in length! Problem is the adjuster screw up at the handlebars is to short to get proper adjustment! I can back that bolt out all the way to where...

Hey fellas, Just had a quick question as Im getting ready to put the old girl away for the winter!Ive heard mixed thoughts how to properly store a bike for the off season. So lemme run down what I was gonna do so and see if you guys think its sufficient! Im charging the battery know and was...

Hey Guys, was just wondering how much travel back should the kicker have when its in its resting position? The other day when I was replacing my clutch plates and I was putting on my side cover and the kicker basically slide off. So I reinstalled it per the manual, and I think its right but when...

Hey guys, so Im replacing my clutch plates and springs and when I tighten down the spring screws they are collapsed all the way! So then when you go to try and use the clutch with lever everything is frozen and wont allow the pressure plate to move!! Any ideas as to whats going on here?? thanks...

Hey guys, So Ive made the proper adjustments per the manual but it still seems like Im having clutch slipping issues! The bike pulls fine through the first 3 gears and after that it seems to still be slipping! So what would you guys suggest as far as replacement plates and springs?? Thanks in...

Hello guys, looking for a good CDI unit for an 81!! Thanks, XSC

Hey Guys, so I installed a set of VM34's on my bike and after initial install it started right up everytime. I knew they had to be synced and tuned so I took the bike to a reputable bike shop and had them sync them and tune them. My problem now is a cant seem to get it started, it will start and...

Hey guys, quick question. So yesterday I intstalled my Mikuni VM34's and have been taking it for a few runs around the block! I notice that when I let off the throttle to shift it maintains a constant RPM. Almost like its on auto pilot, and sometimes if Im at a stop sign and give it a quick blip...

Hey Guys, so I just ordered a set of Mikuni VM34's and was wondering if anyone can give me a tip in putting on the throttle cables! Just thought Id ask, although maybe a stupid question but dont wanna mess anything up!! Ive already unscrewed the tops and dont see how they go together?? Thanks...

Thats right fellas, just about to get on my bike and go take it for a run on the Dyno! Im really excited but also a little nervous to see what the old girl is putting out for numbers! I will keep you guys posted when I get back home with the results!! XsC

Hey guys, I just ordered a size larger for my pilot jets and noticed they have small holes on the sides of the shaft, my stock ones do not?? Did they make changes to them or is that something that changes when you go up a size on pilots! Just wondered what you guys had to say before I put em...

Hey guys, so I just re jetted my carbs, i went up to 140 on the mains and 30 on the pilots! I dropped the needle to the #2 position and turned out the mix screw 2.5 turns! And I unfortunately dont have my book with me right now! The bike runs great with about a half choke but as soon as so take...

Hey Guys, so Im sure this has been asked before but what is a good place to start when re jetting the Bs38's to accept pod filters and free flowing pipes?? It currently has the stock 135 main, and 27.5 pilots, and when I re jet do I need to move the e-clips to? Thanks in Advance,..... XsC

Ok guys check this out! My bike has been running like a top after a fresh top end rebuild and broke down on me tonite! So a little history, The reason why I re built the top end was I had burnt exhaust valve on, (if I remember correctly the right side)! I took the head in to a very good machine...

Hey fellas, Well the persistent rains in NW havent let up one bit since the start of March! So I decided to bring my sweetheart indoors where she would feel more "at home" and also do a little interior decorating! Overall, I think it was a very positive move, she goes great with the curtains and...

Hey guys, Just thought Id share a few pics of my build now that shes finished! It was a long but fun road to get the bike to this point, and I couldnt be any happier with the way it looks and rides to! I gotta give a special thanks to Don Paulson in Portland who helped me out with the welding...

Hey fellas, so I just rebuilt my top end and for the break in period installed straight 30. Ive got about maybe 8 to 10 hours on it and was figuring it was time to switch out the oil and go to a longer term oil! So I know this has been discussed around here but what is the best and most...

Hey guys, Im looking for a good set of points covers with the "650" on them!! Lemme know if you anyone has a set and will trade mine, plus cash! Mine are in great shape but really looking for a set with the 650 on them!! Thanks in Advance!! XsC

Hey guys, so I noticed today I had a little gas leaking into my pod filters! What the hell would cause gas to be leaking into the pods?? The carbs are BS38's and Im running great scott curved drags and pods! And I believe the jetting to be stock! Thanks Guys! XsC

Hey Guys, So me and buddy just rebuilt my top end! We used Mikes XS replacement cylinders with new pistons, rings, and the whole meal deal! Had the head sent to a machine shop and received a clean bill of health! So today we checked it to see if she will turn over and ran a compression check. We...