Search results

tomorrow I can need to gather all the pieces together, I think my post read a little odd I need to sell for more than 20.00 sorry about that.

I cut from the bottom then discovered the 71-76 34mm fork is a tad small for the RD wasted 80.00 I'll see what happens with the new set!

Hi group, Not sure if anyone needs this, but I have a set of new XS fork springs I was trying to use this on my RD with 34mm fork springs but the diameter is a tad small for the damper. I cut them 1.5" to fit my bike so I am not sure if a standard xs also needed to be cut or not. I think it...

Hi guys, I clamped the fork in the triple clamps put a 13mm open end and smacked it about 10 times and it popped off... what a pain! but thanks to all for the help. enlarged the holes and then dremel tooled the openings so there is a slight angle to the holes then wire wheeled it smooth. One...

Thanks, I will try this today!!!!

The 2nd picture shows the parts I wanted to remove so I could drill out the damper rod, the other end has the large piece the springs sit on. Hope the description makes sense.

Hi group for a long time I've thought about what to do on my RD250, decided to do the Minton Mod and after the ordeal of removing the lower bolt (tip: I used a 12 volt impact gun and it was easy). I bought a little Harbor freight drill press - like device for my battery drill.. I took the forks...

Wow thank you so much, I will need to disassemble the forks but as you know one issue at a time. I have 2 sets of forks so that allows me to double check since many issues I've encountered are very different from the various manuals and guides I've found online. I will check back later in a...

Hi group, I'm new and have an RD250 I know this is the wrong forum but searching minton mod always points here. I'm writing because I have an RD with 34mm forks the springs are terrible and since I"m a bit light at 135-140lb the suspension overall is rough. I'm buying some Hagon shocks on the...